Networking Forums

Networking Forums > Computer Networking > Linux Networking > Load balancing : route based

Reply
Thread Tools Display Modes

Load balancing : route based

 
 
Gü¥-¥öm
Guest
Posts: n/a

 
      09-13-2004, 06:17 PM
Dear all,

I'm curently setting up a gateway (linux 2.6.7) with load balancing (
multipath ).
I acces them from lan and my external interfaces are NATed.
I'm used iproute2 as described in the LARTC and nano howto.

My problem is that connections are well balanced but often, long connection
are break because the default route change during the connection.
I've not used equalize because i've read that this is packet-based...


This seem to don't appear when transfert is initiated from the gateway..
The break seems to appear about every "/proc/sys/net/ipv4/route/max_delay"
minutes...
What is the problem ?

Thanks for your help !


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
load balancing Fixer Windows Networking 2 11-08-2007 06:37 AM
Load Balancing... TorwaK Windows Networking 1 12-10-2005 09:24 PM
Load Balancing using 2 NICS (same network) with (iproute2) multipath route Christopher Markov Linux Networking 0 03-04-2004 02:30 PM
FTP Load Balancing Windows Networking 0 01-27-2004 02:13 AM
IP Load Balancing sha Linux Networking 0 08-09-2003 03:34 PM



1 2 3 4 5 6 7 8 9 10 11