Load Balancing between two DSL Modems

Hello,

I have two DSL modems and I want to use both (not only for getting
double bandwidth). I have found only two solutions:

1. using Load balancing router like DLink LB604 etc which has two WAN
ports.
2. using a PC which will have 3 network cards, 2 for 2 DSLs and 1 for
LAN (10 connection). then configuring the routing table so that some of
the machines use the one DSL and some second DSL.

Is there any other solutions?

Thanks,
Davinder

On 6 Feb 2006 04:54:15 -0800, (E-Mail Removed) wrote:

>I have two DSL modems and I want to use both (not only for getting
>double bandwidth). I have found only two solutions:
>
>1. using Load balancing router like DLink LB604 etc which has two WAN
>ports.
>2. using a PC which will have 3 network cards, 2 for 2 DSLs and 1 for
>LAN (10 connection). then configuring the routing table so that some of
>the machines use the one DSL and some second DSL.
>
>Is there any other solutions?

You might like to look at connection aggregation in nat32
http://www.nat32.com
which can use multiple gateways

There are a number of algorithms you can select from which determine
which gateway is used when.


Jim.