Linksys WUSB11 v2.5 Firmware Version?

I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
worked and he flashed the firmware. Since there is no firmware on the
Linksys site, it might
be that he flashed it with the wrong stuff. The FW version
is reported as 1.03.04.00.
Serial number is B411120824
Can anyone tell from those numbers whether the correct firmware is
installed? If you have one, the FW version can be displayed by the
config utility.
If not, where can I get the correct FW to reflash it?

The thing says it's connected, but can't do any data transfer.
The Sent packet box sits at zero while the received packed box
increments. My Belkin unit works on this machine, so I'm confident
i know how to set up the WEP settings. Maybe there's something else
weird in this config utility?

I tried Linksys Customer Support, but their submission page seems to be
configured to prevent any possibility of submitting a request. Requires
a model number, but won't let me input/select one.
mike

--
Return address is VALID.
Bunch of stuff For Sale and Wanted at the link below.
Toshiba & Compaq LiIon Batteries, Test Equipment
Honda CB-125S $800 in PDX
TEK Sampling Sweep Plugin and RM564
Tek 2465 $800, ham radio, 30pS pulser
Tektronix Concept Books, spot welding head...
http://www.geocities.com/SiliconValley/Monitor/4710/

hmmm, i thought the wusb11 dont support firmware flashing, anyway if you got
untilities to flash it, you might have more luck looking for prism 2.5
firmware, since wusb11 v2.5 is base on prism chipset and not amtel like the
others... g'luck

"mike" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
> worked and he flashed the firmware. Since there is no firmware on the
> Linksys site, it might
> be that he flashed it with the wrong stuff. The FW version
> is reported as 1.03.04.00.
> Serial number is B411120824
> Can anyone tell from those numbers whether the correct firmware is
> installed? If you have one, the FW version can be displayed by the
> config utility.
> If not, where can I get the correct FW to reflash it?
>
> The thing says it's connected, but can't do any data transfer.
> The Sent packet box sits at zero while the received packed box
> increments. My Belkin unit works on this machine, so I'm confident
> i know how to set up the WEP settings. Maybe there's something else
> weird in this config utility?
>
> I tried Linksys Customer Support, but their submission page seems to be
> configured to prevent any possibility of submitting a request. Requires
> a model number, but won't let me input/select one.
> mike
>
> --
> Return address is VALID.
> Bunch of stuff For Sale and Wanted at the link below.
> Toshiba & Compaq LiIon Batteries, Test Equipment
> Honda CB-125S $800 in PDX
> TEK Sampling Sweep Plugin and RM564
> Tek 2465 $800, ham radio, 30pS pulser
> Tektronix Concept Books, spot welding head...
> http://www.geocities.com/SiliconValley/Monitor/4710/
>

singapore site has drivers for v2.5, no luck on firmware though
http://www.linksys.com.sg/Support/Do...DBDownloadID=8

"voxDEI" <(E-Mail Removed)> wrote in message
news_AHb.68110$(E-Mail Removed)...
> hmmm, i thought the wusb11 dont support firmware flashing, anyway if you
got
> untilities to flash it, you might have more luck looking for prism 2.5
> firmware, since wusb11 v2.5 is base on prism chipset and not amtel like
the
> others... g'luck
>
> "mike" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> > I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
> > worked and he flashed the firmware. Since there is no firmware on the
> > Linksys site, it might
> > be that he flashed it with the wrong stuff. The FW version
> > is reported as 1.03.04.00.
> > Serial number is B411120824
> > Can anyone tell from those numbers whether the correct firmware is
> > installed? If you have one, the FW version can be displayed by the
> > config utility.
> > If not, where can I get the correct FW to reflash it?
> >
> > The thing says it's connected, but can't do any data transfer.
> > The Sent packet box sits at zero while the received packed box
> > increments. My Belkin unit works on this machine, so I'm confident
> > i know how to set up the WEP settings. Maybe there's something else
> > weird in this config utility?
> >
> > I tried Linksys Customer Support, but their submission page seems to be
> > configured to prevent any possibility of submitting a request. Requires
> > a model number, but won't let me input/select one.
> > mike
> >
> > --
> > Return address is VALID.
> > Bunch of stuff For Sale and Wanted at the link below.
> > Toshiba & Compaq LiIon Batteries, Test Equipment
> > Honda CB-125S $800 in PDX
> > TEK Sampling Sweep Plugin and RM564
> > Tek 2465 $800, ham radio, 30pS pulser
> > Tektronix Concept Books, spot welding head...
> > http://www.geocities.com/SiliconValley/Monitor/4710/
> >
>
>

mike wrote:
> I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
> worked and he flashed the firmware. Since there is no firmware on the
> Linksys site, it might
> be that he flashed it with the wrong stuff. The FW version
> is reported as 1.03.04.00.
> Serial number is B411120824
> Can anyone tell from those numbers whether the correct firmware is
> installed? If you have one, the FW version can be displayed by the
> config utility.
> If not, where can I get the correct FW to reflash it?
>
> The thing says it's connected, but can't do any data transfer.
> The Sent packet box sits at zero while the received packed box
> increments. My Belkin unit works on this machine, so I'm confident
> i know how to set up the WEP settings. Maybe there's something else
> weird in this config utility?
>
> I tried Linksys Customer Support, but their submission page seems to
> be configured to prevent any possibility of submitting a request.
> Requires a model number, but won't let me input/select one.
> mike

I would first power cycle modem, if any, and then restart the router, if
any. See if that helps. Otherwise, set the router to to basics, no
WEP, MAC filtering, and see if it can connect. I have also had some
luck with this problem by setting all the card parameters manually in
device manager, even if using Windows to manage the connection.

Q

Quaoar wrote:
> mike wrote:
>
>>I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
>>worked and he flashed the firmware. Since there is no firmware on the
>>Linksys site, it might
>>be that he flashed it with the wrong stuff. The FW version
>>is reported as 1.03.04.00.
>>Serial number is B411120824
>>Can anyone tell from those numbers whether the correct firmware is
>>installed? If you have one, the FW version can be displayed by the
>>config utility.
>>If not, where can I get the correct FW to reflash it?
>>
>>The thing says it's connected, but can't do any data transfer.
>>The Sent packet box sits at zero while the received packed box
>>increments. My Belkin unit works on this machine, so I'm confident
>>i know how to set up the WEP settings. Maybe there's something else
>>weird in this config utility?
>>
>>I tried Linksys Customer Support, but their submission page seems to
>>be configured to prevent any possibility of submitting a request.
>>Requires a model number, but won't let me input/select one.
>>mike
>
>
> I would first power cycle modem, if any, and then restart the router, if
> any. See if that helps. Otherwise, set the router to to basics, no
> WEP, MAC filtering, and see if it can connect. I have also had some
> luck with this problem by setting all the card parameters manually in
> device manager, even if using Windows to manage the connection.
>
> Q
>
>

been there, done that,
mike

--
Return address is VALID.
Bunch of stuff For Sale and Wanted at the link below.
Toshiba & Compaq LiIon Batteries, Test Equipment
Honda CB-125S $800 in PDX
TEK Sampling Sweep Plugin and RM564
Tek 2465 $800, ham radio, 30pS pulser
Tektronix Concept Books, spot welding head...
http://www.geocities.com/SiliconValley/Monitor/4710/

mike wrote:
> Quaoar wrote:
>> mike wrote:
>>
>>> I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
>>> worked and he flashed the firmware. Since there is no firmware on
>>> the Linksys site, it might
>>> be that he flashed it with the wrong stuff. The FW version
>>> is reported as 1.03.04.00.
>>> Serial number is B411120824
>>> Can anyone tell from those numbers whether the correct firmware is
>>> installed? If you have one, the FW version can be displayed by the
>>> config utility.
>>> If not, where can I get the correct FW to reflash it?
>>>
>>> The thing says it's connected, but can't do any data transfer.
>>> The Sent packet box sits at zero while the received packed box
>>> increments. My Belkin unit works on this machine, so I'm confident
>>> i know how to set up the WEP settings. Maybe there's something else
>>> weird in this config utility?
>>>
>>> I tried Linksys Customer Support, but their submission page seems to
>>> be configured to prevent any possibility of submitting a request.
>>> Requires a model number, but won't let me input/select one.
>>> mike
>>
>>
>> I would first power cycle modem, if any, and then restart the
>> router, if any. See if that helps. Otherwise, set the router to to
>> basics, no WEP, MAC filtering, and see if it can connect. I have
>> also had some luck with this problem by setting all the card
>> parameters manually in device manager, even if using Windows to
>> manage the connection.
>>
>> Q
>>
>>
>
> been there, done that,
> mike

You might try the linksys ftp site which reportedly has files that the
web site does not list. ftp://ftp.linksys.com is the address I have.

Q

Quaoar wrote:
> mike wrote:
>
>>Quaoar wrote:
>>
>>>mike wrote:
>>>
>>>
>>>>I bought this Linksys WUSB11 ver 2.5 used. Owner claimed it never
>>>>worked and he flashed the firmware. Since there is no firmware on
>>>>the Linksys site, it might
>>>>be that he flashed it with the wrong stuff. The FW version
>>>>is reported as 1.03.04.00.
>>>>Serial number is B411120824
>>>>Can anyone tell from those numbers whether the correct firmware is
>>>>installed? If you have one, the FW version can be displayed by the
>>>>config utility.
>>>>If not, where can I get the correct FW to reflash it?
>>>>
>>>>The thing says it's connected, but can't do any data transfer.
>>>>The Sent packet box sits at zero while the received packed box
>>>>increments. My Belkin unit works on this machine, so I'm confident
>>>>i know how to set up the WEP settings. Maybe there's something else
>>>>weird in this config utility?
>>>>
>>>>I tried Linksys Customer Support, but their submission page seems to
>>>>be configured to prevent any possibility of submitting a request.
>>>>Requires a model number, but won't let me input/select one.
>>>>mike
>>>
>>>
>>>I would first power cycle modem, if any, and then restart the
>>>router, if any. See if that helps. Otherwise, set the router to to
>>>basics, no WEP, MAC filtering, and see if it can connect. I have
>>>also had some luck with this problem by setting all the card
>>>parameters manually in device manager, even if using Windows to
>>>manage the connection.
>>>
>>>Q
>>>
>>>
>>
>>been there, done that,
>>mike
>
>
> You might try the linksys ftp site which reportedly has files that the
> web site does not list. ftp://ftp.linksys.com is the address I have.
>
> Q
>
>

excellent suggestion. I did find one fw install, for an unspecified
version. But I don't have a lot to lose at this
point.
mike

--
Return address is VALID.
Bunch of stuff For Sale and Wanted at the link below.
Toshiba & Compaq LiIon Batteries, Test Equipment
Honda CB-125S $800 in PDX
TEK Sampling Sweep Plugin and RM564
Tek 2465 $800, ham radio, 30pS pulser
Tektronix Concept Books, spot welding head...
http://www.geocities.com/SiliconValley/Monitor/4710/