Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > Linksys WRT54GS and non-Linksys adapters

Reply
Thread Tools Display Modes

Linksys WRT54GS and non-Linksys adapters

 
 
Colin
Guest
Posts: n/a

 
      11-12-2006, 01:22 PM
Hi

Have Just upgraded my router to the above model, and some of my network
adapters to matching Speedbooster ones. However my flatmate has a Toshiba
laptop with built in wireless adapter.

I can get the linksys adapters to connect ok, but the Tosh appears to
connect ok inthat the Windows Zero Config tool says its connected and the
tray icons indicate the same but Internet Explorer cannot connect to the
net.

Also do i have to run quickly around each pc and activate the Easy Set up
when ever i press the button on the router cos it seems to change the
encrypyin key and SSID each time. Therefor if i do one pc it connects ok,
but then when i do the next it connects but the first drops as key has
changed! I therefore have to the do the others manually.

I hope someone can shed some light on these issues for me

Thanks

Colin


 
Reply With Quote
 
 
 
 
Malke
Guest
Posts: n/a

 
      11-12-2006, 01:52 PM
Colin wrote:

> Hi
>
> Have Just upgraded my router to the above model, and some of my
> network
> adapters to matching Speedbooster ones. However my flatmate has a
> Toshiba laptop with built in wireless adapter.
>
> I can get the linksys adapters to connect ok, but the Tosh appears to
> connect ok inthat the Windows Zero Config tool says its connected and
> the tray icons indicate the same but Internet Explorer cannot connect
> to the net.
>
> Also do i have to run quickly around each pc and activate the Easy Set
> up when ever i press the button on the router cos it seems to change
> the
> encrypyin key and SSID each time. Therefor if i do one pc it connects
> ok, but then when i do the next it connects but the first drops as key
> has changed! I therefore have to the do the others manually.


Just set up the Linksys once on a wired computer. I've never used the
"Easy Set Up" so you can safely ignore it. Basically, you want to do
these things on the router:

1. Change the default password (which will allow you to get into the
router's configuration settings later) from "admin" to something you
will remember. Write it down - keep it secret, keep it safe. ;-)

2. Change the default SSID (the name of your wireless network) from
"Linksys" to something you will recognize when you see it. I suggest
that clients not use their family name.

3. Set the highest level encryption that *all* wireless adapters can
use. For most people with modern computers, that will be WPA-Personal
(or PSK). Put in the passphrase (or password - I don't remember offhand
what the Linksys allows) and write it down. Keep it secret, keep it
safe. ;-)

Now the other computers will pop up a message that says something like
"there are available wireless networks - click here to see them". You
should see your new network (the name of the SSID you assigned). You'll
have a "click to connect" and the software will ask for the key. This
is where you put in the passphrase or the password you assigned. You'll
connect and off you'll go.

Now, it is possible that your flatmate's Toshiba is older and has an
older wireless adapter that can't do WPA but only the older (and far
less secure WEP). If this is the case, then he won't be able to use
your wireless network unless he 1) can update the firmware of his
wireless adapter - which may not be available; 2) use a new external
wireless network adapter card that can do WPA instead of the built-in
one. All the wireless network must support the encryption being used on
the router.

I hope that helps. Here are some links that are excellent if you need
more:

Wireless - Basic Configuration -
http://www.ezlan.net/Wireless_Config.html
Wireless - Basic Security - http://www.ezlan.net/Wireless_Security.html
My New Wireless does not work - http://www.ezlan.net/wireless.html
http://www.ezlan.net/#wireless

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
Tony
Guest
Posts: n/a

 
      11-12-2006, 04:47 PM
On Sun, 12 Nov 2006 17:52:17 +0300, Malke <(E-Mail Removed)>
wrote:

> Put in the passphrase (or password - I don't remember offhand what the
> Linksys allows) and write it down. Keep it secret, keep it safe.

A good source for WPA passwords is here:
http://grc.com/pass

Tony.
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
linksys wrt54gs ilinkcstemp@gmail.com Wireless Internet 4 02-26-2007 08:10 PM
Linksys WRT54GS Vman Wireless Networks 3 12-15-2006 07:55 PM
Linksys WRT54G vs Linksys WRT54GS Randy Wireless Internet 6 11-22-2006 11:47 PM
Linksys WRT54GS Andrew Network Routers 6 03-20-2005 11:49 AM
Wep vs WPA: Linksys WRT54GS Buck Naked Wireless Internet 2 11-05-2004 10:16 AM



1 2 3 4 5 6 7 8 9 10 11