In article <(E-Mail Removed)> ,
Ash <(E-Mail Removed)> wrote:
:I'm about to put a wireless network into my three story townhouse and
:will be using the following setup
:After some research I have narrowed down the selection to two choices
:- either a linksys WET11/BEFW11S4 combo or a dlink DWL-810+/DI-614+
:combo. I'm having trouble choosing between them. Feature sets and

rice are pretty much the same. So I thought I'd draw on all the
:experience here and ask which do the group prefer and why?
I have WET11/BEFS11S4 (almost exactly what you propose.)
I choose the WET11 over the 614+ after looking at the archived postings
for this group and seeing what people's experiences were. What I
gathered was that if you have a 614+ and it works, then it is solid,
but a non-trivial fraction of the time you can't get the device to
work no matter what you do. On the other side, I found that very very
few people had reported problems getting a WET11 to work.
As I recall, I also found an important technical detail. My memory is
fuzzy now, so you should cross-check this, but I seem to recall
finding out that the 614+ would only work with D-Link equipment;
the WET11 was creditted to work with a number of different manufacturers.
--
This is not the same .sig the second time you read it.