Linksys WAG54G or DrayTek Vigor2600G ?

I about to have ADSL installed installed in a friend's house then use Wi-Fi
to extend it to my house because I'm out of range of ADSL.

I have a home network running and so I'm thinking of using a wireless bridge
into my LAN and connecting to ZEN to get static IPs so that I can run
various servers.

For the ADSL AP, I've narrowed the choices down to Linksys WAG54G or DrayTek
Vigor2600G.

Does anybody have any advice why I should go with one and not the other? I
will be using an existing D-Link 900AP+ as the bridge receiver into the LAN.


--
Ash ([:])

UKRMFBC#8 BOTAFOT#82 BOTAFOF#41 HMC#5 FTB#0
ETV1000 Caponord RD200
http://www.theredline.co.uk
"If everything seems under control, you're just not going fast
enough." -- Mario Andretti

> Does anybody have any advice why I should go with one and not the other? I
> will be using an existing D-Link 900AP+ as the bridge receiver into the LAN.

For bridging, i'd want the same hardware both sides to ensure that the
bridging protocol works ok.

For your choice, I'd go with the Linksys on the basis that it will
probably bridge to a WAP11 2.2 which is fundamentally the same as the
Dlink 900AP+.

I have no experience of the Vigor though.

David.