LinkSys WAG54G ADSL router and SNMP

Does anybody know if the above unit supports SNMP, I'm looking for a router
to connect to my ADSL link which will enable me to monitor the traffic
statitics on the DSL interface ?

Many thanks

Ian

Ian wrote:
> Does anybody know if the above unit supports SNMP, I'm looking for a router
> to connect to my ADSL link which will enable me to monitor the traffic
> statitics on the DSL interface ?

Yup, sure does.

--
Regards
Andy M Jenkins
http://www.uk-bug.net The UK Broadband Usergroup

Ian wrote:
> Does anybody know if the above unit supports SNMP, I'm looking for a
> router to connect to my ADSL link which will enable me to monitor the
> traffic statitics on the DSL interface ?
>
> Many thanks
>
> Ian

Yes, it does, though I've never used it. Turned off by default.
Ed

On Fri, 03 Dec 2004 04:58:25 +0000, Andy M Jenkins
<(E-Mail Removed)> wrote:

>Ian wrote:
>> Does anybody know if the above unit supports SNMP, I'm looking for a router
>> to connect to my ADSL link which will enable me to monitor the traffic
>> statitics on the DSL interface ?
>
>Yup, sure does.

And if you find a MIB for the device, be sure to let us know! Also,
be warned: I've just 'upgraded' my WAG45G to the latest firmware,
and lost practically all the reporting traps and seem to have gained
a lot of lost packets. Ho hum, forward one step, back two.

Pete Murray <(E-Mail Removed)> wrote:

>On Fri, 03 Dec 2004 04:58:25 +0000, Andy M Jenkins
><(E-Mail Removed)> wrote:
>
>>Ian wrote:
>>> Does anybody know if the above unit supports SNMP, I'm looking for a router
>>> to connect to my ADSL link which will enable me to monitor the traffic
>>> statitics on the DSL interface ?
>>
>>Yup, sure does.
>
>And if you find a MIB for the device, be sure to let us know! Also,
>be warned: I've just 'upgraded' my WAG45G to the latest firmware,
>and lost practically all the reporting traps and seem to have gained
>a lot of lost packets. Ho hum, forward one step, back two.

Ah, interesting. Which version have you used?

I've just d/loaded version 1.02.7 from the Linksys site and was going to upgrade it
later. I think I'll wait for a while now....



--
The reply to email address is a valid address of a
proven spammer, quoted with the sole intention of
generating spam for them.
If you'd like to reply to me, then please
use the newsgroup.

On Sat, 04 Dec 2004 16:09:12 +0000, Andrew Sayers
<(E-Mail Removed)> wrote:

>Pete Murray <(E-Mail Removed)> wrote:
>
>>On Fri, 03 Dec 2004 04:58:25 +0000, Andy M Jenkins
>><(E-Mail Removed)> wrote:
>>
>>>Ian wrote:
>>>> Does anybody know if the above unit supports SNMP, I'm looking for a router
>>>> to connect to my ADSL link which will enable me to monitor the traffic
>>>> statitics on the DSL interface ?
>>>
>>>Yup, sure does.
>>
>>And if you find a MIB for the device, be sure to let us know! Also,
>>be warned: I've just 'upgraded' my WAG45G to the latest firmware,
>>and lost practically all the reporting traps and seem to have gained
>>a lot of lost packets. Ho hum, forward one step, back two.
>
>Ah, interesting. Which version have you used?
>
>I've just d/loaded version 1.02.7 from the Linksys site and was going to upgrade it
>later. I think I'll wait for a while now....

Just wound back to V1.01.7 from 1.02.7 and have my traps back and no
evidence of lost packets. Really don't know why I tried the update
- there's nothing wrong with the older version. Maybe a few things
I'd like to see done better (syslog reporting a la WRT54 would be
nice, albeit probably impossible), but it works and does provide
some info about in, out and allowed packets.