That may be the problem! The signal booster not only boots the transmit
signal level, it also has a preamp on the receive side. This would make it
much more sensitive to your neighbor's interference.
Try changing the channel you're using, to get further down, or up, the
spectrum, from his device.
Bill Crocker
"Peter Giotta" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> "David Taylor" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > > either. Net stumbler on the laptop doesn't detect the AP.
> >
> > did it work before?
>
> Yes, in fact it detects my neighbor's AP
>
> >
> > what has changed?
>
> Nothing
>
> >
> > does it work if you remove the change?
>
> Yes.
>
> >
> > David.
>
>
|