On 10 Jul 2005 12:53:21 -0700, "roxbury" <(E-Mail Removed)>
wrote:
>I have two computers in my home, one upstairs, one downstairs. The
>computer downstairs has has a cable modem and internet running to it.
>I recently bought a linksys wireless router wrt54g and a pci adapter
>wmp54g to give my other computer (upstairs) access to the internet.
>Internet is working great on both computers now, windows xp setup the
>router and card automatically. My question is whether i can use this
>equipment to also network these two computers for file sharing,
>printing, games, etc... any help would be greatly appreciated.
Yes. All the 802.11b/g wireless does is encapsulate the 802.3
ethernet packets. It's exactly as if you had plugged into the wired
switch (except there's no wires).
However, there are complications. The WRT54G has a feature called "AP
Isolation" which is really "client isolation". It will prevent one
wireless client from talking to another. This is useful for coffee
shop hot spots, but not a great idea for the home user. It's off by
default and should not be a problem.
I'm not sure of the relative position of the upstairs/downstairs
networks, but antenna orientation may be a problem. The antenna
pattern is a donut like torus with the antenna through the hole.
There's not much signal straight up or down. Therefore, if you need
coverage in the up or down direction, move one or both antennas from
the typical vertical position to horizontal. That will help.
How to setup Windoze XP file sharing.
http://www.wown.com/j_helmig/guidshrh.htm
If you're using the Windoze XP SP2 firewall, be sure to add "File and
Print Sharing" to the exceptions list.
--
Jeff Liebermann
(E-Mail Removed)
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 AE6KS 831-336-2558