"Victor GI4LKG" <(E-Mail Removed)> wrote in message
news:zd3bb.536$%(E-Mail Removed)...
> I am thinking about buying a LinkSys BEFW11S4 AccessPoint/Router.
>
> I need to know if a external antenna can be fitted to this device please.
>
> If Yes is the answer what type of connector is it?
>
> Thanks Victor nr Belfast Northern Ireland
>
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.520 / Virus Database: 318 - Release Date: 18/09/03
>
>
How external is 'external'? If you mean on the roof external, then I
recommend against the BEFW11S4. Buy an access point without switch and
router and place the access point AT THE ANTENNA! Microwaves really don't
like going through wires, so the antenna cable must be kept very short.
Ethernet cable can be 100 meters without degradation and cat 5 cable is a
lot less expensive than microwave transmission line.
Share your reasons for the external antenna and you might receive advice
much more valuable than antenna connector information. Michael Erskine has
published some nice reflector designs the may enable you to accomplish your
objective without an external antenna.
For what it's worth, the connector on the BEFW11S4 is RP-TNC. It's a TNC
connector with a trans-gender center conductor.
Don W.