Sorry Mike, These are long nights for an English cricket fan in B.C. Canada.
The setting concerned was the Filter Internet NAT Redirection: Enable
Ben.
"Ben B" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
| Hello Mike,
|
| May I quote your post?
|
| "I have no knowledge of how you connect to the internet but if using ADSL
| or cable the very first thing I would do would be to use a router even if
| only using a single PC. Enable NAT (Network Address Translation) on the
| router and this will provide a very effective firewall, so good in fact
| that this no longer becomes a major issue with the OS however if you want
| both belt and braces suitable firewalls commonly used that work reasonably
| well with Win Me are early versions of Kerio, formerly Tiny, (v2.1.5 works
| well with Win Me)
| and Zone Alarm (versions up to and including 6.1.744.001)"
|
| From the setup forum in answer to Tony1966. It is still the last post
"Yea
| Thanks Microsoft" on the 03/07/2007 @1123AM
|
| Thanks, Mike.
|
| Ben.
|
| .
| "Mike M" <No_Spam@Corned_Beef.Only> wrote in message
| news:e3zk%(E-Mail Removed)...
| | Ben,
| |
| | Out of curiosity what configuration error did I mention in a previous
post
| | that you picked up on? It's not as if I often post about networking and
| | the like having as I do enough odd networking problems of my own
although,
| | admittedly not with Win Me nor with my router.
| |
| | Cheers,
| |
| | Mike M
| |
| |
| | Ben B <(E-Mail Removed)> wrote:
| |
| | > Hello,
| | >
| | > Firmware 1.46.2 WinMe on a cable connection. One computer only.
| | >
| | > Seven years after the purchase of my first system (including this
| | > router - set-up by an acquaintance) I learn (via 'setup' in these
| | > forums and from a post by Mike M) of an error in configuration.
| | >
| | > This has left me with questions. Since I understand very very little
| | > about networking/routers and their settings I am wondering whether
| | > there are other errors in configuration.
| | >
| | > Under Filters.
| | >
| | > Filtered
| | > Private IP Range: (0 to 254)
| | > 1: 192.168.1. ~
| | > 2: 192.168.1. ~
| | > 3: 192.168.1. ~
| | > 4: 192.168.1. ~
| | > 5: 192.168.1. ~
| | >
| | >
| | > Filtered
| | > Private Port Range:
| | > (0 to 65535)
| | > 1: TCPUDPBoth ~
| | > 2: TCPUDPBoth ~
| | > 3: TCPUDPBoth ~
| | > 4: TCPUDPBoth ~
| | > 5: TCPUDPBoth ~
| | >
| | >
| | > Block WAN Request: Enable
| | > Multicast Pass Through: Enable
| | > IPSec Pass Through: Enable
| | > PPTP Pass Through: Enable
| | > Remote Management: Disable Port: 8080
| | > Remote Upgrade: Disable
| | > MTU: Disable
| | > Size: 1500 Filter Internet NAT Redirection: Enable
| | > Filter IDENT(port 113): Disable
| | >
| | > Appreciate guidance on the above and, if deemed necessary, I will
| | > post with the configurations of other pages.
| | >
| | > Thank-you.
| | >
| | > Ben.
| |
|
|
|
Similar Threads
Linear Mode
