Linksys and new firmware.

Info from linksys web site:
Version 1.08, August 5, 2003
- Complies with final 802.11g standard
- Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption
- Adds UI control to enable/disable frame bursting
- Adds UI control for antenna selection
- Added "B-Only" option to wireless modes
- Added "Default" option to Basic Rate settings

And my questions are:
1. Is the upgrade clean and smooth or did you experience any problems (did
someone destroy wap while upgrading) ?

2. What exactly does this mean :
- Adds UI control to enable/disable frame bursting

Best regards:
Adam Zimny
(E-Mail Removed)

On Wed, 03 Sep 2003 04:05:13 +0200, Adam Zimny spoketh

>Info from linksys web site:
>Version 1.08, August 5, 2003
>- Complies with final 802.11g standard
>- Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption
>- Adds UI control to enable/disable frame bursting
>- Adds UI control for antenna selection
>- Added "B-Only" option to wireless modes
>- Added "Default" option to Basic Rate settings
>
>And my questions are:
>1. Is the upgrade clean and smooth or did you experience any problems (did
>someone destroy wap while upgrading) ?
>
>2. What exactly does this mean :
>- Adds UI control to enable/disable frame bursting
>
>Best regards:
>Adam Zimny
>(E-Mail Removed)

I had troubles with this firmware. Although the upgrade process went
fine, then unit would hang every time I made changes to the
configuration, which meant I had to yank the power to the unit to make
it reboot.

I assume the "UI control to enable/disable frame bursting" simple means
there's a radio button on one of the screens to select "enable" or
"disable" for this feature ...

If you want to upgrade, make sure you got a copy of 1.06 available, in
case you want to downgrade your firmware...


Lars M. Hansen
http://www.hansenonline.net
(replace 'badnews' with 'news' in e-mail address)