Linksys 802.11g WAP54G and WPA Radius - Anybody get this to work?

Sending this a 2nd time...

I've been able to get Linksys 802.11g AP work correctly in WPA Pre-shared
key mode but not when using WPA RADIUS.

When using WPA Radius mode, my Radius server does not get the correct
credentials, it sends host/<partial computer name>

Has anybody got this to work? Any ideas?

I have it working here, I found out that I had to leave the authentification
type on auto for it to work . When I had it set to closed my radius server
never got anything. As soon as I put it to auto or open it worked. I have
a few xp laptops and some ipaq 5555's working very well with it now.



That->Kid

"Terry Jones" <(E-Mail Removed)> wrote in message
news:Odgjb.37943$La.21022@fed1read02...
> Sending this a 2nd time...
>
> I've been able to get Linksys 802.11g AP work correctly in WPA Pre-shared
> key mode but not when using WPA RADIUS.
>
> When using WPA Radius mode, my Radius server does not get the correct
> credentials, it sends host/<partial computer name>
>
> Has anybody got this to work? Any ideas?
>
>

Are you doing PEAP or Certificate authentication? I've tried both without
any luck. My radius server is Microsoft IAS.

I've now got a Cisco 1120 working correctly with WPA PEAP authentication but
i would like to get our Linksys 54g routers working as well.

"That_Kid" <i'(E-Mail Removed)> wrote in message
news:Rqkjb.476830$(E-Mail Removed). net...
> I have it working here, I found out that I had to leave the
authentification
> type on auto for it to work . When I had it set to closed my radius
server
> never got anything. As soon as I put it to auto or open it worked. I
have
> a few xp laptops and some ipaq 5555's working very well with it now.
>
>
>
> That->Kid
>
> "Terry Jones" <(E-Mail Removed)> wrote in message
> news:Odgjb.37943$La.21022@fed1read02...
> > Sending this a 2nd time...
> >
> > I've been able to get Linksys 802.11g AP work correctly in WPA
Pre-shared
> > key mode but not when using WPA RADIUS.
> >
> > When using WPA Radius mode, my Radius server does not get the correct
> > credentials, it sends host/<partial computer name>
> >
> > Has anybody got this to work? Any ideas?
> >
> >
>
>

I'm using certificate authentitication with windows server 2000 IAS. I
tried PEAP really quick but switched back to the certificate. Right now I
am using wep with radius but once wpa is added to my pocketpc then I'm going
wpa all the way. Do you see any entries in IAS when the connection fails?


That->Kid

"Terry Jones" <(E-Mail Removed)> wrote in message
news:gQelb.79438$Ms2.38717@fed1read03...
> Are you doing PEAP or Certificate authentication? I've tried both without
> any luck. My radius server is Microsoft IAS.
>
> I've now got a Cisco 1120 working correctly with WPA PEAP authentication
but
> i would like to get our Linksys 54g routers working as well.
>
> "That_Kid" <i'(E-Mail Removed)> wrote in message
> news:Rqkjb.476830$(E-Mail Removed). net...
> > I have it working here, I found out that I had to leave the
> authentification
> > type on auto for it to work . When I had it set to closed my radius
> server
> > never got anything. As soon as I put it to auto or open it worked. I
> have
> > a few xp laptops and some ipaq 5555's working very well with it now.
> >
> >
> >
> > That->Kid
> >
> > "Terry Jones" <(E-Mail Removed)> wrote in message
> > news:Odgjb.37943$La.21022@fed1read02...
> > > Sending this a 2nd time...
> > >
> > > I've been able to get Linksys 802.11g AP work correctly in WPA
> Pre-shared
> > > key mode but not when using WPA RADIUS.
> > >
> > > When using WPA Radius mode, my Radius server does not get the correct
> > > credentials, it sends host/<partial computer name>
> > >
> > > Has anybody got this to work? Any ideas?
> > >
> > >
> >
> >
>
>