Hi
1. If you have a LAN without an Hardware Router, the topology should be like this (with
ICS Off):
http://www.ezlan.net/network/router.jpg
2. You can add a Wireless Cable/DSL as a second Router to an existing already Routed
Network.
If you would like one coherent Network you have to configure the second Router as a
Switch with an Access Point:
http://www.ezlan.net/router_AP.html
If you would like secured Segregated Network you should configure it as in the following
page:
http://www.ezlan.net/shield.html
Jack (MVP-Networking).
"BINZA@" <mark1.smith(remove this)@virgin.net> wrote in message
news:d89eos$b1s$1$(E-Mail Removed)...
> i have 6 pcs on a home network all on a 100MB LAN i have added a wireless
> router and wirless to one of the pcs the problem is when i try to ping or
> access the internet i do not get a response as the default seems to be the
> lan card.
> Question is how do i set the wireless for internet and LAN for local network
> access. Any ideas welcome thanks for your help.
>
>