TO LALO - THE NETWORK IS NOT ACCESSIBLE

Thanks for your reply.
However, The host computer, which is running Windows XP,
can see the other 2 client computers, which are running
Windows 98 SE.
The problem is with the 2 client computers. They are
getting the error message...
If you can provide some more details, it will be greatly
appreciated.
Thanks again...

>-----Original Message-----
>you MUST activate network putting an USERNAME AND
PASSWORD
>
>close the current session (on WIN 98 computers) and start
>a new one with a valid user on the host computer.
>(if u don understood me let me know and I will try to be
>more clear).
>>-----Original Message-----
>>Hello,
>>I set up a home network of 3 computers.
>>The host is running Windows XP, while the other 2
clients
>are running Windows 98 SE.
>>I set up Internet Sharing.
>>The host is connected to the Internet through a Dial Up
>Connection.
>>All 3 computers are have access to the Internet.
>>However, on one client I have a little problem.
>>When I click on the "Entire Network" in the "Network
>Neighborhood" window, I get the following message:
>>'The Network is not accessible.
>> For more information, look in the help index at the
>topic 'Network Troubelshooting'.
>>I did look it up, and could not fix the problem.
>>Can any one help me resolve this problem?
>>Any help is greatly appreciated.

I've just reponse you in your eailer message...
TIP: the site: www.careyholzman.com/netfixes.htm
is a good one...try it.-

>-----Original Message-----
>Thanks for your reply.
>However, The host computer, which is running Windows XP,
>can see the other 2 client computers, which are running
>Windows 98 SE.
>The problem is with the 2 client computers. They are
>getting the error message...
>If you can provide some more details, it will be greatly
>appreciated.
>Thanks again...
>
>>-----Original Message-----
>>you MUST activate network putting an USERNAME AND
>PASSWORD
>>
>>close the current session (on WIN 98 computers) and
start
>>a new one with a valid user on the host computer.
>>(if u don understood me let me know and I will try to be
>>more clear).
>>>-----Original Message-----
>>>Hello,
>>>I set up a home network of 3 computers.
>>>The host is running Windows XP, while the other 2
>clients
>>are running Windows 98 SE.
>>>I set up Internet Sharing.
>>>The host is connected to the Internet through a Dial Up
>>Connection.
>>>All 3 computers are have access to the Internet.
>>>However, on one client I have a little problem.
>>>When I click on the "Entire Network" in the "Network
>>Neighborhood" window, I get the following message:
>>>'The Network is not accessible.
>>> For more information, look in the help index at the
>>topic 'Network Troubelshooting'.
>>>I did look it up, and could not fix the problem.
>>>Can any one help me resolve this problem?
>>>Any help is greatly appreciated.
>
>.
>