Networking Forums

Networking Forums > Computer Networking > Windows Networking > iSCSI initiator problem

Reply
Thread Tools Display Modes

iSCSI initiator problem

 
 
LanceBishop
Guest
Posts: n/a

 
      01-29-2008, 12:34 AM
I am having a problem with a Microsoft Software Initiator 2.6. It will only
allow me to connect one LUN to the 2003 Server. I have used this several
times in the past and have never had an issue.
I am using a DS3300 iSCSI SAN. connecting to a IBM Blade Server via iSCSI.
It connects just fine, and it will attach which ever LUN has the lowest LUN
number. But it will only attach ONE Lun.

Thanks,
Lance Bishop
(E-Mail Removed)

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
iSCSI, but server is slow FRED Z. Windows Networking 0 01-30-2008 04:33 PM
Nic Properties for iSCSI interface cberends Windows Networking 0 12-03-2007 05:05 PM
Isolate iSCSI NIC to just iSCSI Traffic? Scott Townsend Windows Networking 2 09-27-2007 02:40 AM
iSCSI setup vijay Linux Networking 0 04-11-2006 09:28 PM
iSCSI Chuck Windows Networking 3 09-03-2004 07:51 PM



1 2 3 4 5 6 7 8 9 10 11