ISC Setup/Win95

OK, so I set-up ISC on my ME machine (following the
directions on Practically Networked)and create a startup
disk for my Win95 machine. I run the startup disk and the
Network wizard does not complete, I get a message stating
my Network adapters are not installed or configured
properly. When I go to the device driver in this machine
the NIC indicates that everything is working properly.
Any Suggestions?
Thanks
Mike

In article <036301c3c2b6$91ef6e90$(E-Mail Removed)>, "Mike"
<(E-Mail Removed)> wrote:
>OK, so I set-up ISC on my ME machine (following the
>directions on Practically Networked)and create a startup
>disk for my Win95 machine. I run the startup disk and the
>Network wizard does not complete, I get a message stating
>my Network adapters are not installed or configured
>properly. When I go to the device driver in this machine
>the NIC indicates that everything is working properly.
>Any Suggestions?
>Thanks
>Mike

The Network wizard sometimes fails to find an installed network
adapter, probably because of a bug in the adapter's driver program.

Configure Win95 manually, as shown here:

http://www.practicallynetworked.com/...pip_manual.htm
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

So, I've followed the directions from the link below, but
my ICS protocols are not binding to my TCP/IP. When I run
winipcfg this is confirmed because my IP configurations
does not remotely resemble the example. I downloaded the
networking patch from Carey Holzman's Site prior to
installing ICS and uninstalled/reinstalled ICS wia
Add/Remove. Do I really have to reinstall WinMe? Can I
put a third NIC in the ME machine and connect the 95
machine to that? Would this adversely affect my system?
>-----Original Message-----
>In article <036301c3c2b6$91ef6e90
$(E-Mail Removed)>, "Mike"
><(E-Mail Removed)> wrote:
>>OK, so I set-up ISC on my ME machine (following the
>>directions on Practically Networked)and create a startup
>>disk for my Win95 machine. I run the startup disk and
the
>>Network wizard does not complete, I get a message
stating
>>my Network adapters are not installed or configured
>>properly. When I go to the device driver in this
machine
>>the NIC indicates that everything is working properly.
>>Any Suggestions?
>>Thanks
>>Mike
>
>The Network wizard sometimes fails to find an installed
network
>adapter, probably because of a bug in the adapter's
driver program.
>
>Configure Win95 manually, as shown here:
>
>http://www.practicallynetworked.com/...ics/icsclient_
tcpip_manual.htm
>--
>Best Wishes,
>Steve Winograd, MS-MVP (Windows Networking)
>
>Please post any reply as a follow-up message in the news
group
>for everyone to see. I'm sorry, but I don't answer
questions
>addressed directly to me in E-mail or news groups.
>
>Microsoft Most Valuable Professional - Windows Networking
>http://mvp.support.microsoft.com
>
>Steve Winograd's Networking FAQ
>http://www.bcmaven.com/networking/faq.htm
>.
>

Never mind on all of the above. I found the answer on
your website. You are a God in my world right now.
THANKS!!!
>-----Original Message-----
>In article <036301c3c2b6$91ef6e90
$(E-Mail Removed)>, "Mike"
><(E-Mail Removed)> wrote:
>>OK, so I set-up ISC on my ME machine (following the
>>directions on Practically Networked)and create a startup
>>disk for my Win95 machine. I run the startup disk and
the
>>Network wizard does not complete, I get a message
stating
>>my Network adapters are not installed or configured
>>properly. When I go to the device driver in this
machine
>>the NIC indicates that everything is working properly.
>>Any Suggestions?
>>Thanks
>>Mike
>
>The Network wizard sometimes fails to find an installed
network
>adapter, probably because of a bug in the adapter's
driver program.
>
>Configure Win95 manually, as shown here:
>
>http://www.practicallynetworked.com/...ics/icsclient_
tcpip_manual.htm
>--
>Best Wishes,
>Steve Winograd, MS-MVP (Windows Networking)
>
>Please post any reply as a follow-up message in the news
group
>for everyone to see. I'm sorry, but I don't answer
questions
>addressed directly to me in E-mail or news groups.
>
>Microsoft Most Valuable Professional - Windows Networking
>http://mvp.support.microsoft.com
>
>Steve Winograd's Networking FAQ
>http://www.bcmaven.com/networking/faq.htm
>.
>

In article <07d201c3c377$f602a980$(E-Mail Removed)>,
<(E-Mail Removed)> wrote:
>So, I've followed the directions from the link below, but
>my ICS protocols are not binding to my TCP/IP. When I run
>winipcfg this is confirmed because my IP configurations
>does not remotely resemble the example. I downloaded the
>networking patch from Carey Holzman's Site prior to
>installing ICS and uninstalled/reinstalled ICS wia
>Add/Remove. Do I really have to reinstall WinMe? Can I
>put a third NIC in the ME machine and connect the 95
>machine to that? Would this adversely affect my system?

Please reply to this message in the news group (not by E-mail) with
more information to help other people understand the problem.

What does Winipcfg show for the IP configuration: IP address, subnet
mask, default gateway, and DNS server? Be sure that you're selecting
the right adapter from the menu in Winipcfg

What is the patch that you downloaded? Why did you download it? What
is it supposed to do?
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm