Networking Forums

Networking Forums > Computer Networking > Windows Networking > IPv6???

Reply
 
 
Newman
Guest
Posts: n/a

 
      06-08-2011, 05:33 PM
I have a small LAN which is currently running IPv4. IP addesses are
assigned from a DHCP reservation list, and network communications are
via an NAT Router to our ISP and then the net.

With all the buzz about IPv6, I am starting to have a look at it.
Frankly, it looks as if it is of no use internally at all. We have
more than enough local addresses to do what we want. We are
"unpublished" and are not hosting ANY websites or external servers
(all that is done by our ISP).

The only thing I see as eventually becoming an issue is that there may
come a time when IPv6 is required for our internal client machines to
communicate with some sites on the Internet.

My initial thoughts were that merely getting a new router / gateway
which supports IPv6 would do the trick, but now I am not so sure.

I have done some googling, and the more I read, the more confused -
and concerned - I am getting. Some say that NAT will no longer be
required with IPv6. Frankly, I happen to like NAT as a form of
security. The idea of having fully resovable IPv6 addresses for all of
our machines - effectivly leaving them hung out to dry on the open
Interent - sounds like a new form of "security hell" to me!

I want my LAN PRIVATE, thank you very much. There are a limited number
of machines in our facilty that have had their attack surface narrowed
sufficiently to even consider allowing into the wild.

So, being a total IPv6 noob, could someone either explain how I might
approach this, or at least point me in the direction of a goo primer
on the subject???

Thanks in advance!


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
IPv6 address not connecting but IPv4-mapped -IPv6 does. Please help. DanielJohnson Network Routers 0 01-07-2009 12:10 AM
kernel hangs after setting up Ipv6-ipv6 tunnel Kristoff Bonne Linux Networking 0 09-20-2008 08:36 PM
IPv6 infrastructure for Global and/or Site Specific IPv6 address JackFlash Windows Networking 1 06-25-2007 03:11 PM
Implementing a IPv6 network with dynamically assigned static IPv6 addresses. Ashish Shukla Linux Networking 2 02-13-2007 02:59 PM
Linux host PC(ipv6) can't ping with embedded board(ipv6) with ping6 sangsu Linux Networking 2 10-11-2005 09:06 AM



1 2 3 4 5 6 7 8 9 10 11