ipsec configuration

Adam

Guest

Posts: n/a

05-08-2006, 07:24 AM

Hi,
I have question about ipsec configuration - in my case under openswan.
In my config file I've:
left=172.18.1.2
leftsubnet=10.0.0.0/24
right=172.18.2.2
rightsubnet=192.168.20.0/24
in which I would like give the possibility to tunnel only one machine
from left part: 10.0.0.34 not all network 10.0.0.0/24
How may I do it ?

Greetings
Admo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are Off Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
IPSec-tools configuration question (racood daemon) and IPv6.	D. Stussy	Linux Networking	0	12-01-2011 11:13 PM
IPv6 + IPsec + ipsec-tools 0.6.[4567] + scope:link = no SA established	phil-news-nospam@ipal.net	Linux Networking	0	07-25-2007 09:01 PM
ipsec configuration	Adam	Linux Networking	1	06-01-2006 10:10 PM
iptables for IPSec (Cisco VPN) - where can I find a sample configuration?	arabub	Linux Networking	0	09-24-2003 04:52 PM
iptables for IPSec (Cisco VPN) - where can I find a sample configuration?	arabub	Linux Networking	0	09-07-2003 04:14 AM