Intelligent Gateway 1800 Flash upgrade

Just purchased one of these and it turns out that the software that resides
in the flash is corrupted.

Does anyone know where I can get the flash program and the .ROM file to
reflash the software?

There is nothing on 2wire.com site.

Cheers

"Aosmosis" <(E-Mail Removed)> wrote in message
news:4260ee8f$0$341$(E-Mail Removed).. .
> Just purchased one of these and it turns out that the software that
> resides in the flash is corrupted.
>
> Does anyone know where I can get the flash program and the .ROM file to
> reflash the software?
>
> There is nothing on 2wire.com site.
>
> Cheers
>
>

The message that I am getting is :

The installed version of Intelligent Gateway 1800 software is no longer
functioning properly. This can result from a failed software upgrade or
other memory corruption. Please contact technical support for assistance

In message <4260fffc$0$380$(E-Mail Removed)>, Aosmosis
<(E-Mail Removed)> writes
>The message that I am getting is :
>
>The installed version of Intelligent Gateway 1800 software is no longer
>functioning properly. This can result from a failed software upgrade or
>other memory corruption. Please contact technical support for assistance
>
>
Http://www2.dslreports.com/forum/remark,12453502

Any use?
--
Clint Sharp

The message your getting is from the homeportal monitor which
lies(alot) it was probably blocked by a firewall and does not see the
homeportal

the only time you need to flash the firmware is if the lights on the
front are as below

Power = RED
Broadband = Red
LAN = Green

if these conditions dont apply its not a firmware issue its probably a
3rd party conflict Call 2wire tech support or the person who sold you
the home portal they will be able to help you fix it

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> The message your getting is from the homeportal monitor which
> lies(alot) it was probably blocked by a firewall and does not see the
> homeportal
>
> the only time you need to flash the firmware is if the lights on the
> front are as below
>
> Power = RED
> Broadband = Red
> LAN = Green
>
> if these conditions dont apply its not a firmware issue its probably a
> 3rd party conflict Call 2wire tech support or the person who sold you
> the home portal they will be able to help you fix it
>

yup thats the same sequence that I have.

How the hell can i flash the firmware, without sending it to the US.

BT have said that they dont want anything to do with it.