Install SW has no Management Tool?

I installed SW from CD, quitting before going through the
configuration wizard because I have Wn 2K. There is no
Base Station Management Tool installed (only a network
utility tool). Refuses to re-install because the update
wizard ran during the initial install. Where is the BSMT?

It is at the default IP of the base station, 192.168.2.1, with the default
password of "admin" without the quotes. Check the User's Guide information
for installing on Windows 2000.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Steve" <(E-Mail Removed)> wrote in message
news:3bc701c3e2c6$fb1bf020$(E-Mail Removed)...
> I installed SW from CD, quitting before going through the
> configuration wizard because I have Wn 2K. There is no
> Base Station Management Tool installed (only a network
> utility tool). Refuses to re-install because the update
> wizard ran during the initial install. Where is the BSMT?

"admin" unrecognized, even after 2 hard resets.

>-----Original Message-----
>It is at the default IP of the base station, 192.168.2.1,
with the default
>password of "admin" without the quotes. Check the User's
Guide information
>for installing on Windows 2000.
>--
>Chris H.
>Microsoft Windows MVP
>Associate Expert
>Expert Zone - www.microsoft.com/windowsxp/expertzone
>
>"Steve" <(E-Mail Removed)> wrote in message
>news:3bc701c3e2c6$fb1bf020$(E-Mail Removed)...
>> I installed SW from CD, quitting before going through
the
>> configuration wizard because I have Wn 2K. There is no
>> Base Station Management Tool installed (only a network
>> utility tool). Refuses to re-install because the update
>> wizard ran during the initial install. Where is the
BSMT?
>
>
>.
>

"admin" without the quotes is the default password, all lower case, unless
you changed it. Are you resetting the base station by holding a pen or
unfolded paperclip in the Reset slot for more than five seconds? That will
reset to factory, the default 192.x.x.x address and the admin password.
--
Chris H.
Microsoft Windows MVP
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"Steve" <(E-Mail Removed)> wrote in message
news:33e301c3e2ca$eecc6670$(E-Mail Removed)...
> "admin" unrecognized, even after 2 hard resets.
>
> >-----Original Message-----
> >It is at the default IP of the base station, 192.168.2.1,
> with the default
> >password of "admin" without the quotes. Check the User's
> Guide information
> >for installing on Windows 2000.
> >--
> >Chris H.
> >Microsoft Windows MVP
> >Associate Expert
> >Expert Zone - www.microsoft.com/windowsxp/expertzone
> >
> >"Steve" <(E-Mail Removed)> wrote in message
> >news:3bc701c3e2c6$fb1bf020$(E-Mail Removed)...
> >> I installed SW from CD, quitting before going through
> the
> >> configuration wizard because I have Wn 2K. There is no
> >> Base Station Management Tool installed (only a network
> >> utility tool). Refuses to re-install because the update
> >> wizard ran during the initial install. Where is the
> BSMT?
> >
> >
> >.
> >