Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > Install a pci

Reply
Thread Tools Display Modes

Install a pci

 
 
RicercatoreSbadato
Guest
Posts: n/a

 
      06-06-2006, 07:29 PM
With 'lspci -v' I obtain this:

0000:00:0a.0 Ethernet controller: Atheros Communications, Inc. AR5212
802.11abg NIC (rev 01)
Subsystem: Unknown device 1948:3a99
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2

It's a Nilox PCI wireless card.

How can I use it with Debian 3.1 Sarge ?

 
Reply With Quote
 
 
 
 
John Navas
Guest
Posts: n/a

 
      06-06-2006, 07:43 PM
[POSTED TO alt.internet.wireless - REPLY ON USENET PLEASE]

In <(E-Mail Removed) .com> on 6 Jun 2006
12:29:32 -0700, "RicercatoreSbadato" <(E-Mail Removed)> wrote:

>With 'lspci -v' I obtain this:
>
>0000:00:0a.0 Ethernet controller: Atheros Communications, Inc. AR5212
>802.11abg NIC (rev 01)
> Subsystem: Unknown device 1948:3a99
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: [44] Power Management version 2
>
>It's a Nilox PCI wireless card.
>
>How can I use it with Debian 3.1 Sarge ?


Follow the age old rule: Pick the software, then pick the hardware.

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_How_To>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>
 
Reply With Quote
 
Jerry Peters
Guest
Posts: n/a

 
      06-06-2006, 08:42 PM
RicercatoreSbadato <(E-Mail Removed)> wrote:
> With 'lspci -v' I obtain this:
>
> 0000:00:0a.0 Ethernet controller: Atheros Communications, Inc. AR5212
> 802.11abg NIC (rev 01)
> Subsystem: Unknown device 1948:3a99
> Flags: bus master, medium devsel, latency 32, IRQ 11
> Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: [44] Power Management version 2
>
> It's a Nilox PCI wireless card.
>
> How can I use it with Debian 3.1 Sarge ?
>

I have no idea how to use it with debian, but it uses the madwifi
driver, if you can find any refernces to that.

Jerry
 
Reply With Quote
 
RicercatoreSbadato
Guest
Posts: n/a

 
      06-07-2006, 06:43 AM
yes, I think the solution is the madwifi drivers. My PCI Card isn't
listed in the compatible architecture but I'll try. Thanks.

Jerry Peters wrote:
> RicercatoreSbadato <(E-Mail Removed)> wrote:
> > With 'lspci -v' I obtain this:
> >
> > 0000:00:0a.0 Ethernet controller: Atheros Communications, Inc. AR5212
> > 802.11abg NIC (rev 01)
> > Subsystem: Unknown device 1948:3a99
> > Flags: bus master, medium devsel, latency 32, IRQ 11
> > Memory at ed800000 (32-bit, non-prefetchable) [size=64K]
> > Capabilities: [44] Power Management version 2
> >
> > It's a Nilox PCI wireless card.
> >
> > How can I use it with Debian 3.1 Sarge ?
> >

> I have no idea how to use it with debian, but it uses the madwifi
> driver, if you can find any refernces to that.
>
> Jerry


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Which is best install to use Mindy Wireless Internet 3 01-03-2006 12:27 PM
can not install... john Broadband Hardware 0 03-29-2005 06:34 PM
mn-700 install help Todd Broadband Hardware 5 07-15-2004 09:00 PM
TCP install Windows Networking 2 01-12-2004 04:28 PM
to home install or not to home install(adsl) Shed Broadband 13 09-22-2003 10:01 PM



1 2 3 4 5 6 7 8 9 10 11