Networking Forums

Networking Forums > Computer Networking > Windows Networking > Input Devices Become Disabled

Reply
Thread Tools Display Modes

Input Devices Become Disabled

 
 
John Williams
Guest
Posts: n/a

 
      10-01-2005, 01:12 PM
The Win98 Power Management newsgroup appears to be inactive. So, I'm posing
this question here.

I have power management set to "system standby never", "turn off monitor
after 15 minutes", and "turn off hard disks never". But, my mouse and
keyboard won't work after a considerable length of time (e.g. over nite).
So, because the system won't respond locally, I have to power-off the system
and restart it.

When this happens, my laptop can access the system over my home network fine
and I can see the disk activity on the Win98 system.

TIA

John Williams


 
Reply With Quote
 
 
 
 
Zasha
Guest
Posts: n/a

 
      10-01-2005, 06:11 PM
John Williams wrote:
> The Win98 Power Management newsgroup appears to be inactive. So, I'm posing
> this question here.
>
> I have power management set to "system standby never", "turn off monitor
> after 15 minutes", and "turn off hard disks never". But, my mouse and
> keyboard won't work after a considerable length of time (e.g. over nite).
> So, because the system won't respond locally, I have to power-off the system
> and restart it.
>
> When this happens, my laptop can access the system over my home network fine
> and I can see the disk activity on the Win98 system.
>
> TIA
>
> John Williams
>
>

When this happens to me, I usually discover it is because of
some application, say Spybot's TeaTimer, has snarled RAM.
So, suspect some TSR application and do a process of
elimination experiment using the startup function in msconfig.

Might also want to look in the device manager to see if any
hardware function has gone yellow or red alert.

I suppose a video driver might have become corrupt, or a
setting was somehow changed in the C-MOS, or maybe a RAM
chip is failing, but I suspect an application conflict. If
you do crack open the case, pull out the memory modules,
wipe the contacts down and replace them in opposite slots.
If your video card is really an actual card, pop it out and
re-seat it. Sometimes mechanical adjustments can fix
unexplained anomalies (very seldom, but sometimes)
 
Reply With Quote
 
John Williams
Guest
Posts: n/a

 
      10-06-2005, 02:56 PM
Thanks for the suggestions.

I'd like to shut down the TSR's but am afraid I might not get the computer
to come up without them. Is this a valid concern? If not, I'll shut them
all down and see if the problem goes away. Then, I can add them back. I
have no idea what most of them do.

TIA.

John Williams
"Zasha" <(E-Mail Removed)> wrote in message
news:uW$(E-Mail Removed)...
> John Williams wrote:
>> The Win98 Power Management newsgroup appears to be inactive. So, I'm
>> posing this question here.
>>
>> I have power management set to "system standby never", "turn off monitor
>> after 15 minutes", and "turn off hard disks never". But, my mouse and
>> keyboard won't work after a considerable length of time (e.g. over nite).
>> So, because the system won't respond locally, I have to power-off the
>> system and restart it.
>>
>> When this happens, my laptop can access the system over my home network
>> fine and I can see the disk activity on the Win98 system.
>>
>> TIA
>>
>> John Williams

> When this happens to me, I usually discover it is because of some
> application, say Spybot's TeaTimer, has snarled RAM. So, suspect some TSR
> application and do a process of elimination experiment using the startup
> function in msconfig.
>
> Might also want to look in the device manager to see if any hardware
> function has gone yellow or red alert.
>
> I suppose a video driver might have become corrupt, or a setting was
> somehow changed in the C-MOS, or maybe a RAM chip is failing, but I
> suspect an application conflict. If you do crack open the case, pull out
> the memory modules, wipe the contacts down and replace them in opposite
> slots. If your video card is really an actual card, pop it out and re-seat
> it. Sometimes mechanical adjustments can fix unexplained anomalies (very
> seldom, but sometimes)



 
Reply With Quote
 
zasha
Guest
Posts: n/a

 
      10-06-2005, 04:59 PM
John Williams wrote:

> Thanks for the suggestions.
>
> I'd like to shut down the TSR's but am afraid I might not get the computer
> to come up without them. Is this a valid concern? If not, I'll shut them
> all down and see if the problem goes away. Then, I can add them back. I
> have no idea what most of them do.
>
> TIA.
>
> John Williams
> "Zasha" <(E-Mail Removed)> wrote in message
> news:uW$(E-Mail Removed)...
>
>>John Williams wrote:
>>
>>>The Win98 Power Management newsgroup appears to be inactive. So, I'm
>>>posing this question here.
>>>
>>>I have power management set to "system standby never", "turn off monitor
>>>after 15 minutes", and "turn off hard disks never". But, my mouse and
>>>keyboard won't work after a considerable length of time (e.g. over nite).
>>>So, because the system won't respond locally, I have to power-off the
>>>system and restart it.
>>>
>>>When this happens, my laptop can access the system over my home network
>>>fine and I can see the disk activity on the Win98 system.
>>>
>>>TIA
>>>
>>>John Williams

>>
>>When this happens to me, I usually discover it is because of some
>>application, say Spybot's TeaTimer, has snarled RAM. So, suspect some TSR
>>application and do a process of elimination experiment using the startup
>>function in msconfig.
>>
>>Might also want to look in the device manager to see if any hardware
>>function has gone yellow or red alert.
>>
>>I suppose a video driver might have become corrupt, or a setting was
>>somehow changed in the C-MOS, or maybe a RAM chip is failing, but I
>>suspect an application conflict. If you do crack open the case, pull out
>>the memory modules, wipe the contacts down and replace them in opposite
>>slots. If your video card is really an actual card, pop it out and re-seat
>>it. Sometimes mechanical adjustments can fix unexplained anomalies (very
>>seldom, but sometimes)

>
>
>

The conservative methods are:
boot in safemode. If you lose I/O over the keyboard/mouse,
then suspect it is one of the applications that also starts
in safemode.
AND, regardless of how you boot into windows, isolate one at
a time. After you test, out the app back into the rotation.

Even if one of the apps is the video functions, you will
still come up in the default VGA.

I guess you will have to take out one app at a time,
overnight. This could take many nights!

As another approach, you could re-install (and update) the
video drivers. If you use special mouse drivers, reinstall
(and update) those. I also use proprietary keyboard
software, and if I was experiencing what you are, I'd redo
these drivers/apps also.

I doubt that you have a hardware problem, unless
keyboard/mouse is cordless. If so, replace batteries as the
first step. After that, substitute the wireless setup with
hardwire.
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SP Pro SP2 needs double input of WPA key kakii Wireless Networks 2 02-14-2008 01:04 PM
INPUT vs. FORWARD for icmp NG Linux Networking 1 06-21-2005 04:16 PM
NFS input/output errors John Stolz Linux Networking 1 12-03-2004 04:43 PM
nfs input/output errors John Stolz Linux Networking 5 12-03-2004 04:31 PM
nfs input/output errors John Stolz Linux Networking 0 06-02-2004 02:20 PM



1 2 3 4 5 6 7 8 9 10 11