ICS ON wIN 98se

Help! I am at my wits end!! I have read many web pages/news sheets and
'read me' instructions and still it doesn't work!! Host (Win98se/Broadband)
and one client (WinXP). Networking OK - pinging both ways OK (two Cat 5e
cables, one 5 port switch, bedroom repainted BLUE to match cable colour
crossing the ceiling etc) Internet Connection Sharing installed correctly -
all protocols as per MS Insts. Although the connection remains Ok it does
not find the internet server - error number 0x800CCC0D.

I have Norton installed but disabled whilst trying ICS. I have had one
hour on the phone (UK to USA) talking to the card manufacturers who says it
does work BUT they cannot tell me how!
Fs

Read some of the other recent posts that have "ICS" in the
Subject line.


"Fred" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Help! I am at my wits end!! I have read many web pages/news sheets and
> 'read me' instructions and still it doesn't work!! Host
(Win98se/Broadband)
> and one client (WinXP). Networking OK - pinging both ways OK (two Cat 5e
> cables, one 5 port switch, bedroom repainted BLUE to match cable colour
> crossing the ceiling etc) Internet Connection Sharing installed
correctly -
> all protocols as per MS Insts. Although the connection remains Ok it does
> not find the internet server - error number 0x800CCC0D.
>
> I have Norton installed but disabled whilst trying ICS. I have had one
> hour on the phone (UK to USA) talking to the card manufacturers who says
it
> does work BUT they cannot tell me how!
> Fs
>
>

On Fri, 28 Nov 2003 13:59:06 -0000, "Fred"
<(E-Mail Removed)> wrote:

> I have Norton installed but disabled whilst trying ICS.

First, remove this completely from your system and don't reinstall it
until your ics is functioning correctly.

Next, post some details of your ip addressing. Are you using the
default addressing via dhcp from the ics server which has a fixed
address of 192.168.0.1? Run winipcfg and post details of the
addressing information. Can you connect okay from the ics server with
and without ics enabled?


Jim.