ICF and NAT/RRA

Hi

Windows 2003 Standard.

I want to activate Routing and Remote Access from Start > All programs >
Admin Tools > Routing and Remote Access > Right click Server and the click
"Configure and Enable Routing and Remote Access".

The error I get is: ICF enabled.

I did disable ICF but the problem remains. I can't access to this
configuration.

Any help pls ?

Thanks

Try to reboot the computer to see if that helps. If it does not you might
try going into Device Manager and uninstalling the network adapter and
rebooting the computer at which time it should reinstall via PNP to see if
that helps. Another option is to use netsh to reset tcp/ip. I am assuming
this is not a domain controller as the procedure would be different. Also
check Event Viewer to see if anything related is reported in system or
application logs. --- Steve

http://support.microsoft.com/default.aspx?kbid=317518 -- how to use netsh
to reset W2003 tcp/ip for non domain controllers.

"Sean" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hi
>
> Windows 2003 Standard.
>
> I want to activate Routing and Remote Access from Start > All programs >
> Admin Tools > Routing and Remote Access > Right click Server and the click
> "Configure and Enable Routing and Remote Access".
>
> The error I get is: ICF enabled.
>
> I did disable ICF but the problem remains. I can't access to this
> configuration.
>
> Any help pls ?
>
> Thanks
>
>

Thanks Steve...

I am still experiencing the same problem.

Any other ideas ?

thanks.

"Steven L Umbach" <(E-Mail Removed)> wrote in message ...

Try to reboot the computer to see if that helps. If it does not you might
try going into Device Manager and uninstalling the network adapter and
rebooting the computer at which time it should reinstall via PNP to see if
that helps. Another option is to use netsh to reset tcp/ip. I am assuming
this is not a domain controller as the procedure would be different. Also
check Event Viewer to see if anything related is reported in system or
application logs. --- Steve

http://support.microsoft.com/default.aspx?kbid=317518 -- how to use netsh
to reset W2003 tcp/ip for non domain controllers.

"Sean" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> Hi
>
> Windows 2003 Standard.
>
> I want to activate Routing and Remote Access from Start > All programs >
> Admin Tools > Routing and Remote Access > Right click Server and the click
> "Configure and Enable Routing and Remote Access".
>
> The error I get is: ICF enabled.
>
> I did disable ICF but the problem remains. I can't access to this
> configuration.
>
> Any help pls ?
>
> Thanks
>
>

Dang. I can't think of anything else offhand. I long shot might be to try to
boot into safe mode with networking to try. If you have more than one
adapter, disable it on all adapters. --- Steve


"Sean" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Thanks Steve...
>
> I am still experiencing the same problem.
>
> Any other ideas ?
>
> thanks.
>
> "Steven L Umbach" <(E-Mail Removed)> wrote in message ...
>
> Try to reboot the computer to see if that helps. If it does not you might
> try going into Device Manager and uninstalling the network adapter and
> rebooting the computer at which time it should reinstall via PNP to see if
> that helps. Another option is to use netsh to reset tcp/ip. I am assuming
> this is not a domain controller as the procedure would be different. Also
> check Event Viewer to see if anything related is reported in system or
> application logs. --- Steve
>
> http://support.microsoft.com/default.aspx?kbid=317518 -- how to use netsh
> to reset W2003 tcp/ip for non domain controllers.
>
> "Sean" <(E-Mail Removed)> wrote in message
> news:%(E-Mail Removed)...
>> Hi
>>
>> Windows 2003 Standard.
>>
>> I want to activate Routing and Remote Access from Start > All programs >
>> Admin Tools > Routing and Remote Access > Right click Server and the
>> click
>> "Configure and Enable Routing and Remote Access".
>>
>> The error I get is: ICF enabled.
>>
>> I did disable ICF but the problem remains. I can't access to this
>> configuration.
>>
>> Any help pls ?
>>
>> Thanks
>>
>>
>
>
>