On 04/25/04 12:21 Bob spoke:
> I have a Linksys WRT54G that has https open but I have
> "Administration/Remote Management" set to "Disable" in the management.
> I have the 2.00.8 firmware installed.
> Any ideas?
I upgraded the firmware to 2.02.7 and still no go.
# nmap -P0 gw
Starting nmap 3.45 (
http://www.insecure.org/nmap/ ) at 2004-04-25 13:23 EDT
Interesting ports on gw (192.168.1.110):
(The 1652 ports scanned but not shown below are in state: closed)
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
53/tcp open domain
80/tcp open http
110/tcp open pop-3
Nmap run completed -- 1 IP address (1 host up) scanned in 1.316 seconds
# nmap -P0 216.168.107.123
Starting nmap 3.45 (
http://www.insecure.org/nmap/ ) at 2004-04-25 13:24 EDT
Interesting ports on nexredback-216-168-107-123.nexicom.net
(216.168.107.123):
(The 1652 ports scanned but not shown below are in state: closed)
PORT STATE SERVICE
22/tcp open ssh
25/tcp open smtp
53/tcp open domain
80/tcp open http
443/tcp open https
Nmap run completed -- 1 IP address (1 host up) scanned in 2.359 seconds
There shouldn't be a 443 port on the external IP.
--
-------------------------------------------------------
Remove .NOSPAM from my email address to reply directly.
Similar Threads
Linear Mode
