Home wired networking problem

I'm following the Microsoft 8 parts to setup a small
network and I'm having problems, I'm on part 7, I just
completed file and print sharing. Now I'm trying to view
all 3 of my computers in Network beighborhood. I don't see
them. Help... When i restart the computer I'm getting
error: a required .DLL FILE, UI.DLL was not found. What is
this?

No telling what UI.DLL might be, but you do have to wait a bit for the
Network Neighborhood to "settle down" Once all computers are turned on and
connected to the network it may take up to 15 minutes before you can browse
the network.

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"Earl" <(E-Mail Removed)> wrote in message
news:0e2d01c3fb46$ed2b0d50$(E-Mail Removed)...
> I'm following the Microsoft 8 parts to setup a small
> network and I'm having problems, I'm on part 7, I just
> completed file and print sharing. Now I'm trying to view
> all 3 of my computers in Network beighborhood. I don't see
> them. Help... When i restart the computer I'm getting
> error: a required .DLL FILE, UI.DLL was not found. What is
> this?

Richard, I have been witing now for two days. I have shut
down all computers. Now what?
>-----Original Message-----
>No telling what UI.DLL might be, but you do have to wait
a bit for the
>Network Neighborhood to "settle down" Once all computers
are turned on and
>connected to the network it may take up to 15 minutes
before you can browse
>the network.
>
>--
>Richard G. Harper [MVP Win9x] (E-Mail Removed)
>* PLEASE post all messages and replies in the newsgroups
>* for the benefit of all. Private mail is usually not
replied to.
>* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
>"Earl" <(E-Mail Removed)> wrote in
message
>news:0e2d01c3fb46$ed2b0d50$(E-Mail Removed)...
>> I'm following the Microsoft 8 parts to setup a small
>> network and I'm having problems, I'm on part 7, I just
>> completed file and print sharing. Now I'm trying to view
>> all 3 of my computers in Network beighborhood. I don't
see
>> them. Help... When i restart the computer I'm getting
>> error: a required .DLL FILE, UI.DLL was not found. What
is
>> this?
>
>
>.
>

You need to turn them all on and leave them alone for at least 15 minutes.
Don't turn any off or reboot any during this process.

--
Richard G. Harper [MVP Win9x] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


<(E-Mail Removed)> wrote in message
news:14d001c3fba6$2d481ef0$(E-Mail Removed)...
> Richard, I have been witing now for two days. I have shut
> down all computers. Now what?
> >-----Original Message-----
> >No telling what UI.DLL might be, but you do have to wait
> a bit for the
> >Network Neighborhood to "settle down" Once all computers
> are turned on and
> >connected to the network it may take up to 15 minutes
> before you can browse
> >the network.
> >
> >--
> >Richard G. Harper [MVP Win9x] (E-Mail Removed)
> >* PLEASE post all messages and replies in the newsgroups
> >* for the benefit of all. Private mail is usually not
> replied to.
> >* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
> >
> >
> >"Earl" <(E-Mail Removed)> wrote in
> message
> >news:0e2d01c3fb46$ed2b0d50$(E-Mail Removed)...
> >> I'm following the Microsoft 8 parts to setup a small
> >> network and I'm having problems, I'm on part 7, I just
> >> completed file and print sharing. Now I'm trying to view
> >> all 3 of my computers in Network beighborhood. I don't
> see
> >> them. Help... When i restart the computer I'm getting
> >> error: a required .DLL FILE, UI.DLL was not found. What
> is
> >> this?
> >
> >
> >.
> >

did u use the wizard to setup th e network
try settin g it up with out the wizard
www.pctechnicians.ca
Guides
workgroup setup guide
good luck

--
Robert Vegas
"Richard G. Harper" <(E-Mail Removed)> wrote in message
news:%23GEpVOA$(E-Mail Removed)...
> You need to turn them all on and leave them alone for at least 15 minutes.
> Don't turn any off or reboot any during this process.
>
> --
> Richard G. Harper [MVP Win9x] (E-Mail Removed)
> * PLEASE post all messages and replies in the newsgroups
> * for the benefit of all. Private mail is usually not replied to.
> * HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
> <(E-Mail Removed)> wrote in message
> news:14d001c3fba6$2d481ef0$(E-Mail Removed)...
> > Richard, I have been witing now for two days. I have shut
> > down all computers. Now what?
> > >-----Original Message-----
> > >No telling what UI.DLL might be, but you do have to wait
> > a bit for the
> > >Network Neighborhood to "settle down" Once all computers
> > are turned on and
> > >connected to the network it may take up to 15 minutes
> > before you can browse
> > >the network.
> > >
> > >--
> > >Richard G. Harper [MVP Win9x] (E-Mail Removed)
> > >* PLEASE post all messages and replies in the newsgroups
> > >* for the benefit of all. Private mail is usually not
> > replied to.
> > >* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
> > >
> > >
> > >"Earl" <(E-Mail Removed)> wrote in
> > message
> > >news:0e2d01c3fb46$ed2b0d50$(E-Mail Removed)...
> > >> I'm following the Microsoft 8 parts to setup a small
> > >> network and I'm having problems, I'm on part 7, I just
> > >> completed file and print sharing. Now I'm trying to view
> > >> all 3 of my computers in Network beighborhood. I don't
> > see
> > >> them. Help... When i restart the computer I'm getting
> > >> error: a required .DLL FILE, UI.DLL was not found. What
> > is
> > >> this?
> > >
> > >
> > >.
> > >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.595 / Virus Database: 378 - Release Date: 2/25/2004