I have on both pc's WINDOWS XP SP2 PROFESSIONAL with full installation
of tools and utilities, I use only Windows Firewall. I'm using Draytek
Vigor 2700VG router with the latest firmware (2.7.3.3). I connect to the
router two pc's. One on ethernet port and one through wireless port.
Both PC's obtaining their ip automatic. PC with wired ethernet
connection on router takes 192.168.1.10 for ip and the wireless pc takes
the 192.168.1.11. PC with 192.168.10 named as MiG and the wireless with
ip 192.168.1.11 named as Sukhoi. The local lan network workgroup is
named Munja, I changed the Windows default WORKGROUP. I share some
folders to the local network from both pc's. When i'm trying to connect
from 192.168.10 to 192.168.1.11 using start-run-\\192.168.1.11 or
\\Sukhoi to it's shared folders, i take a message that the network path
was not found. From 192.168.1.11 when I'm trying to connect to
192.168.1.10 with both ways I mention before there is no problem. Also
when I connect using cable 192.168.1.11 to ethernet port of router no
problem exists, I can access to both pc's without problem. The wireless
card is the following : LEVEL ONE WNC-0301 USB LAN ADAPTER. Which is the
problem? Please notice that until 5 days ago I was using Speedtouch 510i
with out problems...
------------------------------------------------------------------------
View this thread:
http://www.wirelessforums.org/showthread.php?t=33731
http://www.wirelessforums.org