High Gain Antenna Kit for TNC Connectors

Has anyone had the opportunity to try one these out (High Gain Antenna Kit
for TNC Connectors)?

http://www.linksys.com/products/prod...id=38&prid=643

"DJL" <(E-Mail Removed)> wrote in message
news:GJKCc.29405$(E-Mail Removed)...
> Has anyone had the opportunity to try one these out (High Gain Antenna Kit
> for TNC Connectors)?
>
> http://www.linksys.com/products/prod...id=38&prid=643
>
>

I looked at this link and it shows as a related product the Linksys WRT54G.
I must admit I'm a bit puzzled as to how to remove the antenna(s) from the
WRT54G.
They do not appear to be able to unscrew as suggested.
I see a wire running down from the antenna at the elbow joint, and see no
way to unscreww the antenna above this point.

Is there a trick to removing these antennas that I do not see?

On Fri, 25 Jun 2004 00:55:02 GMT, "DJL" <(E-Mail Removed)> wrote:

>Has anyone had the opportunity to try one these out (High Gain Antenna Kit
>for TNC Connectors)?
>
>http://www.linksys.com/products/prod...id=38&prid=643
>
These look like the Radio Shack antennas.

Look at the pictures in this link it shows if you pull the cap off then
you'll see how it unscrews. My other question now does it require to replace
both antennas or just the sending one?

http://www.squakmt.com/LinksysBEFW11S4.V2/
"paul" <(E-Mail Removed)> wrote in message
news:NFNCc.27255$(E-Mail Removed)...
>
> "DJL" <(E-Mail Removed)> wrote in message
> news:GJKCc.29405$(E-Mail Removed)...
> > Has anyone had the opportunity to try one these out (High Gain Antenna
Kit
> > for TNC Connectors)?
> >
> > http://www.linksys.com/products/prod...id=38&prid=643
> >
> >
>
> I looked at this link and it shows as a related product the Linksys
WRT54G.
> I must admit I'm a bit puzzled as to how to remove the antenna(s) from the
> WRT54G.
> They do not appear to be able to unscrew as suggested.
> I see a wire running down from the antenna at the elbow joint, and see no
> way to unscreww the antenna above this point.
>
> Is there a trick to removing these antennas that I do not see?
>
>

Thanks for the link!
I would not have ever realized those were caps covering the antenna
connectors!

"DJL" <(E-Mail Removed)> wrote in message
newsbXDc.11712$(E-Mail Removed)...
> Look at the pictures in this link it shows if you pull the cap off then
> you'll see how it unscrews. My other question now does it require to
replace
> both antennas or just the sending one?
>
> http://www.squakmt.com/LinksysBEFW11S4.V2/
> "paul" <(E-Mail Removed)> wrote in message
> news:NFNCc.27255$(E-Mail Removed)...
> >
> > "DJL" <(E-Mail Removed)> wrote in message
> > news:GJKCc.29405$(E-Mail Removed)...
> > > Has anyone had the opportunity to try one these out (High Gain Antenna
> Kit
> > > for TNC Connectors)?
> > >
> > > http://www.linksys.com/products/prod...id=38&prid=643
> > >
> > >
> >
> > I looked at this link and it shows as a related product the Linksys
> WRT54G.
> > I must admit I'm a bit puzzled as to how to remove the antenna(s) from
the
> > WRT54G.
> > They do not appear to be able to unscrew as suggested.
> > I see a wire running down from the antenna at the elbow joint, and see
no
> > way to unscreww the antenna above this point.
> >
> > Is there a trick to removing these antennas that I do not see?
> >
> >
>
>

I also discovered if you buy the antenna from Linksys it comes as a kit and
includes 2 antennas.

"paul" <(E-Mail Removed)> wrote in message
news:nVYDc.13869$(E-Mail Removed)...
> Thanks for the link!
> I would not have ever realized those were caps covering the antenna
> connectors!
>
> "DJL" <(E-Mail Removed)> wrote in message
> newsbXDc.11712$(E-Mail Removed)...
> > Look at the pictures in this link it shows if you pull the cap off then
> > you'll see how it unscrews. My other question now does it require to
> replace
> > both antennas or just the sending one?
> >
> > http://www.squakmt.com/LinksysBEFW11S4.V2/
> > "paul" <(E-Mail Removed)> wrote in message
> > news:NFNCc.27255$(E-Mail Removed)...
> > >
> > > "DJL" <(E-Mail Removed)> wrote in message
> > > news:GJKCc.29405$(E-Mail Removed)...
> > > > Has anyone had the opportunity to try one these out (High Gain
Antenna
> > Kit
> > > > for TNC Connectors)?
> > > >
> > > > http://www.linksys.com/products/prod...id=38&prid=643
> > > >
> > > >
> > >
> > > I looked at this link and it shows as a related product the Linksys
> > WRT54G.
> > > I must admit I'm a bit puzzled as to how to remove the antenna(s) from
> the
> > > WRT54G.
> > > They do not appear to be able to unscrew as suggested.
> > > I see a wire running down from the antenna at the elbow joint, and see
> no
> > > way to unscreww the antenna above this point.
> > >
> > > Is there a trick to removing these antennas that I do not see?
> > >
> > >
> >
> >
>
>

Linksys sales they will be shipping in two to three weeks.

"DJL" <(E-Mail Removed)> wrote in message
news:GJKCc.29405$(E-Mail Removed)...
> Has anyone had the opportunity to try one these out (High Gain Antenna Kit
> for TNC Connectors)?
>
> http://www.linksys.com/products/prod...id=38&prid=643
>
>