hi. question about linksys wireless

I wan't to disable the wireless On my linksys 80211b and g router. And
anyone tell me the code, to get in the network? Thanks.

Go to the internet exployer and type in the IP that is in the manual.



"res0i39c" <(E-Mail Removed)> wrote in message
news:BQ4Rf.11978$(E-Mail Removed).. .
> I wan't to disable the wireless On my linksys 80211b and g router. And
> anyone tell me the code, to get in the network? Thanks.
>
>

"res0i39c" <(E-Mail Removed)> hath wroth:

>I wan't to disable the wireless On my linksys 80211b and g router. And
>anyone tell me the code, to get in the network? Thanks.

It's usually on the "wireless" page in the web based setup. Not all
wireless routers have a wireless disable feature.

If you want more specifics, kindly disclose the model number, hardware
version, and firmware version.
--
Jeff Liebermann (E-Mail Removed)
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558

"res0i39c" <(E-Mail Removed)> wrote in message
news:BQ4Rf.11978$(E-Mail Removed).. .
>I wan't to disable the wireless On my linksys 80211b and g router. And
>anyone tell me the code, to get in the network? Thanks.
>

192.168.1.1

user name: admin
password: admin

If they don't work. Then you will have to push the reset button on the back
of the unit.
*Warning* If you push the button to do a reset, all settings that were
stored will be reset to factory.

username - this is left blank on Linksys

"__spc__" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
> username - this is left blank on Linksys
>

Not on mine. I had to enter admin to get in. They may have changed it. Mine
was old.