** Help REQ: Rate Limiting on Virtual Interfaces

I have a Redhat 9 box with 2 NICS - eth0 & eth1. Both NICs are
100mbit.

I have the following IP addresses on eth1:

192.168.10.1/24
10.10.10.1/24
172.18.10.1/24


I would like to simulate a WAN environment between these 3 virtual IP
addresses (each IP is the default gateway for 2 computers).

The routing is working great between the 3 IP addresses.

How can I limit the bandwidth used for each IP (and the machines
behind each IP address). If I cannot limit the bandwidth, can I limit
the bandwidth for the entire ethernet device?

Ideally, I would like to have computers on all 3 interfaces talking to
each other at 512kbps maximum.


TIA!!!!!

(E-Mail Removed) (NoNameHere) wrote in news:ee7698ab.0312100620.ad449d9
@posting.google.com:

>
> How can I limit the bandwidth used for each IP (and the machines
> behind each IP address). If I cannot limit the bandwidth, can I limit
> the bandwidth for the entire ethernet device?
>

Here is how u limit it:
http://lartc.org/
http://www.docum.org/
http://tldp.org/HOWTO/Traffic-Control-tcng-HTB-HOWTO/
http://tcng.sourceforge.net/
http://linux-ip.net/gl/tcng/

Here goes the theory:
http://qos.ittc.ukans.edu/
http://opalsoft.net/qos/DS.htm
http://www.almesberger.net/cv/papers/tcio8.pdf


P.Krumins