Sorry, didnt read your message proper!!
Please dismiss my last post
Alan
"Stelios Koulouris" <(E-Mail Removed)> wrote in message
news:1069500047.144388@athprx02...
> Untill yesterday I had at home a wired network consisting of three
computers
> (Lets name them A, B, C) a network bridge, and a DSL modem.
>
> Yesterday I bought to US Robotics Wirelses PCI Adapters (USR-5416) in
order
> to connect Computers A and C wireless.
>
> So now we have :
>
> Computer A: IP: 194.168.1.3
> Subnet: 255.255.0.0
> Gateway: 194.168.1.1
> Wireless Network Connection (Enabled Bridged) with Computer C
> Local Area Connection (Enabled, Bridged) through a Network bridge with DSL
> modem and Computer B
>
> DSL Modem: IP: 194.168.1.1
> Subnet: 255.255.0.0
> Conected to the Network bridge. The connection to internet is RFC1483
> Bridged, PPPoE.
>
> Computer B: IP: 194.168.1.5
> Subnet: 255.255.0.0
> Gateway: 194.168.1.3
> Its a Laptop. Conected to the Network Bridge. Gets Internet access through
> Computer A and Internet Connection Sharing.
>
> Computer C: IP: 194.168.1.4
> Subnet: 255.255.0.0
> Gateway: 194.168.1.3
> Connected through the Second Wireless adapter with Computer A.
> The Signal strength is "Very good"
> In the USR LAN Configuration Utility, in the Configuration Tab we have the
> same SSID with Computer A (GR) the same network type (Ad-hoc), the same
> chanel (2) the same preamble (Long Preamble), but still computer C can't
> connect with any other computer in the network, can't access the internet,
> can't even "ping" any other computer.
>
> Please any ideas are more than welcome as I am stuck and can't find any
> solution to the problem.
> I forgot to mention, No data encryption is enabled.
> All other Computers works as expected. Network Name: Mshome with different
> computer names for each computer.
>
>
|
Linear Mode
