help - NTL and Netgear wireless router.

hello all.

I need your help.
I work on a Mac with NTL cable broadband.
I have recently fitted an Airport Card and purchased a Netgear wireless
cable router.

For a day it worked perfectly, i just plugged it in and the card found
the network and off it went,
However when i turned all my plugs off overnight and rebooted the next
day its all gone to pot.

I know my airport card works because it can see other networks, i know
my modem works if i connect directly via ethernet so it must be the
router. I logged onto the config via a browser (192.168 etc) and it
keeps asking me for the isp username and password, when i entered them
its goes away and thinks about it and prompts me again..

I've tried setting it back to factory default with no avail.. how come
it worked perfectly without a password first time round and now it
doesnt....

Can anyone help..

ta
Jules

(E-Mail Removed) wrote:
>hello all.
>
>I need your help.
>I work on a Mac with NTL cable broadband.
>I have recently fitted an Airport Card and purchased a Netgear wireless
>cable router.
>
>For a day it worked perfectly, i just plugged it in and the card found
>the network and off it went,
>However when i turned all my plugs off overnight and rebooted the next
>day its all gone to pot.
>
>I know my airport card works because it can see other networks, i know
>my modem works if i connect directly via ethernet so it must be the
>router. I logged onto the config via a browser (192.168 etc) and it
>keeps asking me for the isp username and password, when i entered them
>its goes away and thinks about it and prompts me again..
>
>I've tried setting it back to factory default with no avail.. how come
>it worked perfectly without a password first time round and now it
>doesnt....
>
>Can anyone help..
>
>ta
>Jules

Try turning all off again,
reboot NTL supplied cable modem FIRST (let it do its thing for a couple of
minutes)
THEN turn on the netgear router after the NTL modem is settled.

reasoning - the netgear needs to see the functioning NTL modem in order to
provide proxy/NAT... if its not up & running it will assume incorrect gateway
status.

Hope that works for ya

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
> hello all.
>
> I need your help.
> I work on a Mac with NTL cable broadband.
> I have recently fitted an Airport Card and purchased a Netgear wireless
> cable router.
>
> For a day it worked perfectly, i just plugged it in and the card found
> the network and off it went,
> However when i turned all my plugs off overnight and rebooted the next
> day its all gone to pot.
>
> I know my airport card works because it can see other networks, i know
> my modem works if i connect directly via ethernet so it must be the
> router. I logged onto the config via a browser (192.168 etc) and it
> keeps asking me for the isp username and password, when i entered them
> its goes away and thinks about it and prompts me again..
>
Cable BB doesn't use a login, Netgears usually have the option to disable
the ISP login, it's on the Basic Settings page on my Netgear FVS318.

P.

<(E-Mail Removed)> wrote in message
news:(E-Mail Removed) ups.com...
> hello all.
>
> I need your help.
> I work on a Mac with NTL cable broadband.
> I have recently fitted an Airport Card and purchased a Netgear wireless
> cable router.
>
> For a day it worked perfectly, i just plugged it in and the card found
> the network and off it went,
> However when i turned all my plugs off overnight and rebooted the next
> day its all gone to pot.
>
> I know my airport card works because it can see other networks, i know
> my modem works if i connect directly via ethernet so it must be the
> router. I logged onto the config via a browser (192.168 etc) and it
> keeps asking me for the isp username and password, when i entered them
> its goes away and thinks about it and prompts me again..
>
> I've tried setting it back to factory default with no avail.. how come
> it worked perfectly without a password first time round and now it
> doesnt....
>
> Can anyone help..
>
> ta
> Jules
>
Have a look here - www.chetnet.co.uk and you will find someone can help in
the forum.