Thunnus Albacarus <(E-Mail Removed)> wrote in
news:Xns96C2602E448C9ThunnusAlbacares@211.29.133.5 0:
Don't worry i've fixed it, Upgraded the DG834g from 1.05 to 2.10.22
firmware, and now were running at 98%. Takes 14 secs to dump 44mb between
machines....
You bloody beauty....
Greg
> I recently purchased a netgear DG834g ADSl
> router/firewall/modem/Switch unit as well as a Wireless Ethernet card
> Netgear WG311 b/g.
>
> So far so good, Hooked up the DG834g, connected to the net from my old
> Ethernet PC (has a Dlink 500tx card in it) cat 5 attached to the
> 10/100 port on the DG834g, (Running at Full Duplex 100mbps.) all looks
> great so far.
>
> Next hooked up the Wireless card in another PC 30 feet away, and got
> it running at 54mbps to the DG834g and out through the net. (had a
> beer then... i was so impressed)
>
>
> Next connected the 2 pc's up so they could talk to each other, yeap
> can see shares, moved a few small files no problem.
>
> Now the fun bit, If i transfer a 100mb file from either PC to the
> other, it takes up to 37 minuets to do, and from the stats on the
> Wireless PC, i can't get it to perform greater than 2.6kbps , even
> though it says its operating at 54mbps ?
>
> Anyone have a few pointers for me ?
>
> Thanks
>
> Greg
>
|