Networking Forums

Networking Forums > Computer Networking > Windows Networking > Help! Multicast packages do not pass between subnetworks

Reply
Thread Tools Display Modes

Help! Multicast packages do not pass between subnetworks

 
 
Leon
Guest
Posts: n/a

 
      06-23-2005, 07:43 AM
There are three segments of a network windows, for example:
192.168.0.x - Server1(Win2000) - 192.168.1.x - Server2(Win2000) -
192.168.2.x
with masks 255.255.255.0. In " Routing and Remote Access " installed IGMP
v2 protocol in Route mode. Package multicast passes from a network
192.168.2.x in a network 192.168.0.x, and back is not present..

And on Server2 on both network interfaces in a field State it is written
"Querier", and on Server1 on 192.168.1.x interface there is a mysterious
inscription: "non querier/non forwarding".

Help me please! What it is necessary to make, that the packages passed in
both parties?


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Configuring router with multiple subnetworks on same physical port Jane Linux Networking 5 10-14-2008 06:02 AM
Can Microsoft's RRAS be configured for multicast? Such as in cases where you want to make it a multicast rendevous point? Spin Windows Networking 0 10-26-2006 01:06 PM
Fragmented IP packages Johann Höchtl Linux Networking 1 07-17-2006 07:55 AM
AOL packages Rupert Broadband 2 03-01-2005 08:48 PM
Gateway/forwarding problem between subnetworks Aymeric Duclert Linux Networking 1 08-16-2003 11:24 PM



1 2 3 4 5 6 7 8 9 10 11