Help with CAT 5 to FIBER changeover from one building 150 feet away to another

09-28-2004, 02:01 AM

Is there anyone out there that could help me with a project that has
been dumped on me.

I have 2 METAL buildings 150 feet apart and am told I should run CAT 5
then change to fiber to insulate the buildings from each other
electrically.

How, and also important, what pieces of hardware Brands, models you
may have used in such a project. Any recommendations other than than
this plan would be helpful too.

Help!

I am an electrician and need the help at my Wifes place of biz to help
them out.

Regards

Rick

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fiber to the (premises \| home \| building) in London?	bob	Broadband	14	05-24-2009 10:12 PM
Performance issues in fiber conencted building	Mike Bailey	Windows Networking	2	03-21-2006 08:30 PM
Help with changeover, please	Mari	Broadband	7	10-25-2004 10:25 AM
How to and WHEN to change over from a CAT 5 cable to FIBER ends to insulate two METAL buildings 150 feet apart for EMI and RFI deterence	Roscoe Pendoscoe	Windows Networking	2	09-29-2004 01:56 AM
I only want to go 500 feet (outdoors), but can't quite get to 150 feet.	Dave M	Wireless Internet	17	07-10-2004 09:02 AM