I got netgear WGPS606 and I can't get it work

first if I hook up
with lan port to pc by not fix ip
it can't find it . after i fix ip to 192.168.0.100
it can connect yes !! but problem still come .

It's go through process till step assign ip for printserver
they said no ip assign / ipconflict
[my router is 192.168.0.1]

or ip it not in subnetmask
[how can 192.168.0.1 and 192.168.0.102 in subnet 255.255.255.0 is not
same subnet]

so I change ip print server to
192.168.0.6 in stead[this is PIA i have to change ip from WGPS 606 and
change from pc i hook up again
i change pc to 192.168.0.5 after]

first setup went smoother I can print from pc that I hook to wgps606
with lan wire fine but
from another pc
even i use setup cd I can't setup printer by that

after i login to wgps606 it said connect and signal is 99%

plus ip is assign already

but even pc I hook up if I puul out lan and use wireless it not even
reach

ok I back to wire connect towgps606 that pc
not have any ip assign from wgps606 plus cant go online
even it said in setup it's connect

I hook up with netgear firewall router for 1st try

and 2nd try I use linksis SRX200 it's have same problem

and tech support not even call me back after

I also ask some question like

this wgps606 can act alone like
router if i don't have another wireless router they said yes but it not
work at all

any thing you can give me vlue to setup ?

ps. I even turn off whole firewall system

for netgear router it self it said it connect to wgps606 but nothing go
through . can't even ping

and nothing responds from linksys router

ANOTHER DETAILS

I use toshiba sattellite L30 connect direct by cat5e lan wire to
wgps606
another laptop connect to router netgear wgt624v2
hp pavilion connect to router netgear wgt624v2

may be I'm stuck in router but I turn off firewall already [disable
firewall in srx 200 / SPI firewall disable in net gear router]
It should be can pass already do I need to forward port or do something
special ?

thank in advance if u can help me with it

Pawint


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=36834
http://www.wirelessforums.org

On Mon, 14 Jan 2008 22:07:16 -0500, Pawint_K
<(E-Mail Removed)> wrote in
<(E-Mail Removed)>:

>[HUGE SNIP]

Do you know it's a wireless _client_ device, _not_ a router or access
point? Did you run the Smart Wizard?

--
Best regards, FAQ for Wireless Internet: <http://Wireless.wikia.com>
John Navas FAQ for Wi-Fi: <http://wireless.wikia.com/wiki/Wi-Fi>
Wi-Fi How To: <http://wireless.wikia.com/wiki/Wi-Fi_HowTo>
Fixes to Wi-Fi Problems: <http://wireless.wikia.com/wiki/Wi-Fi_Fixes>