Give us a clue... (Fixed IP)

I can't connect with fixed IP on a WPA Wireless network.
Roaming and automaticly assigned IPs work but when I try to set the two
wireless machines to fixed IPs they won't connect. (one is WinXP, other
Ubuntu)
Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the two
wireless ones to be ...2.3 & ...2.4
(I wanted to do it for port forwarding.)

Any ideas what I should be looking for?

TIA

Slatts

On Sat, 17 May 2008 18:57:12 +0100, "Sla#s" <(E-Mail Removed)>
wrote:

>I can't connect with fixed IP on a WPA Wireless network.
>Roaming and automaticly assigned IPs work but when I try to set the two
>wireless machines to fixed IPs they won't connect. (one is WinXP, other
>Ubuntu)
>Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the two
>wireless ones to be ...2.3 & ...2.4
>(I wanted to do it for port forwarding.)
>
>Any ideas what I should be looking for?

Nope. No ideas. I have no clue what you're talking about, what
you're trying to accomplish, why you need static IP's on the clients,
how these clients are actually configured, what exact operating
systems are being used, what device you're connecting to, whether the
static IP's you picked are already in use, what diagnostics you've
tried, and what other hardware you have to work with. Try a better
description of what you have to work with and what you're trying to
accomplish.

--
# Jeff Liebermann 150 Felker St #D Santa Cruz CA 95060
# 831-336-2558 (E-Mail Removed)
# http://802.11junk.com (E-Mail Removed)
# http://www.LearnByDestroying.com AE6KS

To restore balance to the world Sla#s wrote in
g0n6c4$cqe$(E-Mail Removed)
>> I can't connect with fixed IP on a WPA Wireless network.
>> Roaming and automaticly assigned IPs work but when I try to set the
>> two wireless machines to fixed IPs they won't connect. (one is
>> WinXP, other Ubuntu)
>> Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the
>> two wireless ones to be ...2.3 & ...2.4
>> (I wanted to do it for port forwarding.)
>>
>> Any ideas what I should be looking for?
>>
>> TIA
>>
>> Slatts

Look in your router something along the lines of "
LAN Clients" and add your fixed IPs.

Chris


--
Superb hosting & domain name deals http://dn-22.co.uk
The Handyman http://www.looker.me.uk
The FlatPack Man http://www.flat-pack.info

On May 17, 8:57*pm, "Sla#s" <p...@KNOTslatts.net> wrote:
> I can't connect with fixed IP on a WPA Wireless network.
> Roaming and automaticly assigned *IPs work but when I try to set the two
> wireless machines to fixed IPs they won't connect. (one is WinXP, other
> Ubuntu)
> Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the *two
> wireless ones to be ...2.3 & ...2.4
> (I wanted to do it for port forwarding.)
>
> Any ideas what I should be looking for?
>
> TIA
>
> Slatts

Ok when assigning a fixed IP,

- What is the netmask you are using.
- What is the output of IPconfig.
- What is the range of DHCP IP addresses defined within your router?

-aljuhani.

"Sla#s" <(E-Mail Removed)> wrote in message
news:g0n6c4$cqe$(E-Mail Removed)...
>I can't connect with fixed IP on a WPA Wireless network.
> Roaming and automaticly assigned IPs work but when I try to set the two
> wireless machines to fixed IPs they won't connect. (one is WinXP, other
> Ubuntu)
> Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the two
> wireless ones to be ...2.3 & ...2.4
> (I wanted to do it for port forwarding.)
>
> Any ideas what I should be looking for?

You never mention DNS address, are you you using for a DNS IP?

To manually configure a machine with a static IP addrss you'll need four
things.

1. Static IP Address for each machine. check to see if there is an active
host by pinging the address while on DHCP.

2. Subnet Mask. More than likely will be set for you after you type in the
IP but should prolly be 255.255.255.0

3. Default Gateway, should be the IP address of your router/firewall/ap.

4. Primary DNS server. Either use the IP address of your router/firewall or
check with your ISP and use the actual DNS server IP address.

Should work.

Adair

Adair Winter wrote:
<SNIP>>>
>> Any ideas what I should be looking for?
>
> You never mention DNS address, are you using for a DNS IP?
>
Both the static ones of my provider, Open DNS and I also tried the gateway.

> To manually configure a machine with a static IP address you'll need
> four things.
>
> 1. Static IP Address for each machine. check to see if there is an
> active host by pinging the address while on DHCP.
>
That's what I'm not getting unless I let it get the IP automatically.

> 2. Subnet Mask. More than likely will be set for you after you type
> in the IP but should prolly be 255.255.255.0
>
Yes that just pops up when a static IP is entered.

> 3. Default Gateway, should be the IP address of your
> router/firewall/ap.

That is set OK at 192.168.2.1

> 4. Primary DNS server. Either use the IP address of your
> router/firewall or check with your ISP and use the actual DNS server
> IP address.

I've tried my providers ones (l95.74.***.***), 'Open DNS' ones and
currently, the local gateway. (l92.l68.2.l)


Slatts
------------------------------------------------------------------------------------
Belkin F5D8631(192. . .1), WinXP SP3(wired 'static IP' 192. . .2), Wireless
WinXP SP3 Media centre and Wireless Ubuntu 8.04.

STOP PRESS....
I think I've found the problem

From a review of the router:
"Unlike some competing routers, the N1 does not support DHCP reservation"

Slatts

Joker7 wrote:
<SNIP>
>>> Any ideas what I should be looking for?
>>>
>
> Look in your router something along the lines of "
> LAN Clients" and add your fixed IPs.

Interestingly although the router will show the connected machines IPs I can
find no provision for adding LAN clients manually.

This is the problem - From a review:
"Unlike some competing routers, the N1 does not support DHCP reservation"

Slatts

Sla#s wrote:
> Joker7 wrote:
> <SNIP>
>>>> Any ideas what I should be looking for?
>>>>
>>
>> Look in your router something along the lines of "
>> LAN Clients" and add your fixed IPs.
>
> Interestingly although the router will show the connected machines
> IPs I can find no provision for adding LAN clients manually.

huh ?

> This is the problem - From a review:
> "Unlike some competing routers, the N1 does not support DHCP
> reservation"

huh ?

Joker7 wrote:
> To restore balance to the world Sla#s wrote in
> g0n6c4$cqe$(E-Mail Removed)
>>> I can't connect with fixed IP on a WPA Wireless network.
>>> Roaming and automaticly assigned IPs work but when I try to set the
>>> two wireless machines to fixed IPs they won't connect. (one is
>>> WinXP, other Ubuntu)
>>> Gateway is 192.168.2.1 a wired machine is ...2.2 and I wanted the
>>> two wireless ones to be ...2.3 & ...2.4
>>> (I wanted to do it for port forwarding.)
>>>
>>> Any ideas what I should be looking for?
>>>
>>> TIA
>>>
>>> Slatts
>
> Look in your router something along the lines of "
> LAN Clients" and add your fixed IPs.
>
> Chris

is that like "reserving" IP addresses within the DHCP pool range ?
ie - for poking holes in your pool for static IP vs correcting your DHCP
definition ?

Sla#s wrote:
>
> STOP PRESS....
> I think I've found the problem
>
> From a review of the router:
> "Unlike some competing routers, the N1 does not support DHCP
> reservation"

ok... so what's you DHCP range pool definition to support 3 computers ?

Why woud you put all IP addresses next to each other ?
vs say DHCP up at the 50, 100, 150, or 200 range
and leave the lower range for static addresses ?

For me - I always leave 1-50 for static....
and the DHCP is at the 150 range