In article <(E-Mail Removed)>,
(E-Mail Removed) says...
> Chris ---
>
> "Duplex" simply means you're able to send and receive data (most often the human voice) from the same device whether that be with your phone, 2-way radio, or PC.
> Half-duplex devices let you send and receive, but only one-way at a time. If you've ever used a walkie-talkie, then you know what half-duplex conversations sound like. You have to push the TALK button to send your message. But as long as you are holding the TALK key, you can't hear what anyone else is saying. You must release the button to receive.
> That's the big problem with the old-fashioned speakerphone: it's only a step up from a walkie-talkie. In essence, it pushes a virtual TALK button every time you start to speak and cuts off the person on the other end. When you've finished speaking, the speakerphone then transmits what the person on the other end is saying. Those cut-off sentences and stop-start conversations can be frustrating to say the least. Two-way radio etiquette has you saying "over" when you're
finished speaking so whoever's on the other end knows they can begin speaking. Can you imagine having to do the same on all your business calls?
> Enter full duplex
> Actually, full duplex is nothing new. In fact, you already know exactly what it sounds like. Your corded or cordless phones are full-duplex devices letting you and your caller speak simultaneously without any dropouts in either one of your voices.
> It's when you use a hands-free speakerphone that you really appreciate full duplex. Conventional speakerphones must shut the speaker off when the mic is activated so as not to pick up your caller's voice and transmit it along with yours causing an echo effect. When you speak, you can't hear what your caller is saying. This problem is really compounded if both of you are using conventional speakerphones. A full-duplex device digitizes the signal coming out of its speaker
(your caller's voice). It then edits this info out of the signal it's transmitting (your voice) using a built-in digital processor similar to those found in PCs. This eliminates echo effect and more importantly, does away with the on-off mic/speaker dilemma. Full-duplex devices do all of this virtually instantaneously so your calls sound natural and free-flowing. It's this technology that differentiates high-end conferencing systems from ordinary, half-duplex
speakerphones.
> What's "digital duplex"?
> Panasonic is trying to rectify the sometimes awful, always annoying half-duplex sound quality typical of conventional speakerphones by using what they call Digital Duplex technology. While it doesn't quite deliver the same sound quality as full duplex, the special digital circuitry does help reduce the echo and dropout effects.
> What about talking on the internet?
> If you're using your PC to talk on the internet, it's best to install a
> full-duplex sound card in your PC. Because internet talk has a host of
> obstacles specific to the medium it must overcome bandwidth, internet
> traffic, connection speed why add the frustration of stop-start,
> half-duplex conversations? The time and cost of a full-duplex sound card
> are worth it.
>
>
> On Fri, 06 Aug 2004 19:59:33 +0800, chris wrote:
>
> > what is the difference between full duplex and half duplex ??
>
>
About 100mbits!
If you try using Full duplex, make sure each device supports it
perfectly. In actuality in a home network, you will not see any
difference in performance. It pays off in more corporate networks when
there is a lot of bi-directional traffic, like in SQL queries.
Similar Threads
Linear Mode
