Networking Forums

Networking Forums > Network Hardware > Broadband Hardware > Fluctuating Signal Strength

Reply
Thread Tools Display Modes

Fluctuating Signal Strength

 
 
Jerry
Guest
Posts: n/a

 
      09-24-2004, 08:25 PM
I have a home network using the MN-700 Base station
(located on top of a 6 foot bookcase), a notebook with
the MN-720 (about 25 feet from the Base Station) and two
desktop units with MN-730 PCI adapters (about 30 feet
from the Base Station). The desktop computers' OS is XP
(SP2) and the laptop's OS is XP, but has not been stepped
up to SP2. The network usually works fine but the signal
strength fluctuates greatly (from Very Good to Very Low)
at each computer (this was happening BEFORE SP2 and now
continues!). This happens without any changes in the
location of either the Base Station or the computers and
within a time frame of minutes. There are no appliances
or other devices that are cycling when this happens nor
is there any other activity (people moving around) when
this happens. Also the connection speed varies from 54
Mbps to 1 Mbps (without regard to the signal strength) at
the same time. I have tried repositioning the antennas
and this does not have any long-term effect. I have the
latest Firmware update at each device, but the
fluctuations were happening even before I updated.

Does anyone have any ideas why, how or if there is a fix?

Thanks,
Jerry

 
Reply With Quote
 
 
 
 
Ed
Guest
Posts: n/a

 
      09-24-2004, 09:20 PM
You might try changing channel's on mn-700. try channel
1 or 11.
>-----Original Message-----
>I have a home network using the MN-700 Base station
>(located on top of a 6 foot bookcase), a notebook with
>the MN-720 (about 25 feet from the Base Station) and two
>desktop units with MN-730 PCI adapters (about 30 feet
>from the Base Station). The desktop computers' OS is XP
>(SP2) and the laptop's OS is XP, but has not been

stepped
>up to SP2. The network usually works fine but the

signal
>strength fluctuates greatly (from Very Good to Very Low)
>at each computer (this was happening BEFORE SP2 and now
>continues!). This happens without any changes in the
>location of either the Base Station or the computers and
>within a time frame of minutes. There are no appliances
>or other devices that are cycling when this happens nor
>is there any other activity (people moving around) when
>this happens. Also the connection speed varies from 54
>Mbps to 1 Mbps (without regard to the signal strength)

at
>the same time. I have tried repositioning the antennas
>and this does not have any long-term effect. I have the
>latest Firmware update at each device, but the
>fluctuations were happening even before I updated.
>
>Does anyone have any ideas why, how or if there is a fix?
>
>Thanks,
>Jerry
>
>.
>

 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Please help - Fluctuating signal from router and disconnection Mike Wireless Networks 0 04-22-2007 11:59 AM
Fluctuating wireless signal from router Mike Wireless Networks 0 04-20-2007 12:52 PM
Signal strength is low BnD Wireless Networks 4 02-04-2007 07:30 PM
System Tray Signal Strength -vs- Wireless Properties Strength Scott Wireless Networks 1 04-07-2005 10:17 PM
NTL CM signal strengths fluctuating Richard Sobey Broadband 1 08-17-2004 01:34 PM



1 2 3 4 5 6 7 8 9 10 11