flashing locked wrt54g

Hi,

could somebody give me hints flashing a WRT54G version2 with a (official)
firmware?
My Problem in detail is that already an self-baked openWRT firmware is on
it. So using the web-interface is not possible, isn't it?
I tried to flash via tftp, but i always got the error message "timed out"
with tftp (under Suse 9.1)
I don't have the possibility to set boot_wait because i don't got access to
ssh or telnet.
Any Suggestions?

Thx,
Jochen

Reviving a dead router:
http://www.hyperdrive.be/hyperwrt/index.php?page=how-to

Lance
*****

Jochen Demmer thought carefully and wrote on 12/28/2004 12:13 PM:
> Hi,
>
> could somebody give me hints flashing a WRT54G version2 with a (official)
> firmware?
> My Problem in detail is that already an self-baked openWRT firmware is on
> it. So using the web-interface is not possible, isn't it?
> I tried to flash via tftp, but i always got the error message "timed out"
> with tftp (under Suse 9.1)
> I don't have the possibility to set boot_wait because i don't got access to
> ssh or telnet.
> Any Suggestions?
>
> Thx,
> Jochen
>
>

That worked fine. Uploading the firmware while device boots worked fine but
it's quite hard to time it.

"Lance" <lltbhill@link_earth.net> schrieb im Newsbeitrag
news:(E-Mail Removed)...
> Reviving a dead router:
> http://www.hyperdrive.be/hyperwrt/index.php?page=how-to
>
> Lance
> *****
>
> Jochen Demmer thought carefully and wrote on 12/28/2004 12:13 PM:
> > Hi,
> >
> > could somebody give me hints flashing a WRT54G version2 with a
(official)
> > firmware?
> > My Problem in detail is that already an self-baked openWRT firmware is
on
> > it. So using the web-interface is not possible, isn't it?
> > I tried to flash via tftp, but i always got the error message "timed
out"
> > with tftp (under Suse 9.1)
> > I don't have the possibility to set boot_wait because i don't got access
to
> > ssh or telnet.
> > Any Suggestions?
> >
> > Thx,
> > Jochen
> >
> >