Networking Forums

Networking Forums > Wireless Networking > Wireless Networks > File Sharing <sigh>

Reply
Thread Tools Display Modes

File Sharing <sigh>

 
 
drybones
Guest
Posts: n/a

 
      05-03-2006, 10:36 AM
Wireless systerm setup between two Dell computers via a Linksys wireless
router.
I can see files in old Dell but can not access them.
I did setup file and printer sharing.
Now what?

Thanks for reading and hopefully replying,
drybones


 
Reply With Quote
 
 
 
 
Newport
Guest
Posts: n/a

 
      05-03-2006, 10:54 AM
Can you tell us what OS in the pc's?

--

"drybones" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Wireless systerm setup between two Dell computers via a Linksys wireless
> router.
> I can see files in old Dell but can not access them.
> I did setup file and printer sharing.
> Now what?
>
> Thanks for reading and hopefully replying,
> drybones
>



 
Reply With Quote
 
Malke
Guest
Posts: n/a

 
      05-03-2006, 11:13 AM
drybones wrote:

> Wireless systerm setup between two Dell computers via a Linksys
> wireless router.
> I can see files in old Dell but can not access them.
> I did setup file and printer sharing.
> Now what?
>
> Thanks for reading and hopefully replying,
> drybones


This is most commonly caused by a misconfigured firewall. Run the
Network Setup Wizard on both computers, making sure to enable File &
Printer Sharing, and reboot. The only "gotcha" is that this will turn
on the XPSP2 Windows Firewall. If you aren't running a third-party
firewall or have an antivirus with "Internet Worm Protection" (like
Norton 2005/06) which acts as a firewall, then you're fine. If you have
third-party firewall software, configure it to allow the Local Area
Network traffic as trusted. I usually do this with my firewalls with an
IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you would
substitute your correct subnet.

Then create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder.

If that doesn't work for you, here is an excellent network
troubleshooter by MVP Hans-Georg Michna. Take the time to go through it
and it will usually pinpoint the problem area(s) -
http://winhlp.com/wxnet.htm

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
drybones
Guest
Posts: n/a

 
      05-03-2006, 11:55 AM
WinXP Home with SP2 on both Dell machines
Get the popup about "apparently you have no permission, etc..

"Newport" <*********@xxx.xx> wrote in message
news:44588bf6$0$18343$(E-Mail Removed)...
> Can you tell us what OS in the pc's?
>
> --
>
> "drybones" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Wireless systerm setup between two Dell computers via a Linksys wireless
>> router.
>> I can see files in old Dell but can not access them.
>> I did setup file and printer sharing.
>> Now what?
>>
>> Thanks for reading and hopefully replying,
>> drybones
>>

>
>



 
Reply With Quote
 
drybones
Guest
Posts: n/a

 
      05-03-2006, 12:35 PM

"Malke" <(E-Mail Removed)> wrote in message
news:OB$(E-Mail Removed)...
> drybones wrote:
>
>> Wireless systerm setup between two Dell computers via a Linksys
>> wireless router.
>> I can see files in old Dell but can not access them.
>> I did setup file and printer sharing.
>> Now what?
>>
>> Thanks for reading and hopefully replying,
>> drybones

>
> This is most commonly caused by a misconfigured firewall. Run the
> Network Setup Wizard on both computers, making sure to enable File &
> Printer Sharing, and reboot. The only "gotcha" is that this will turn
> on the XPSP2 Windows Firewall. If you aren't running a third-party
> firewall or have an antivirus with "Internet Worm Protection" (like
> Norton 2005/06) which acts as a firewall, then you're fine. If you have
> third-party firewall software, configure it to allow the Local Area
> Network traffic as trusted. I usually do this with my firewalls with an
> IP range. Ex. would be 192.168.1.0-192.168.1.254. Obviously you would
> substitute your correct subnet.
>
> Then create shares as desired. XP Home does not permit sharing of users'
> home directories (My Documents) or Program Files, but you can share
> folders inside those directories. A better choice is to simply use the
> Shared Documents folder.
>
> If that doesn't work for you, here is an excellent network
> troubleshooter by MVP Hans-Georg Michna. Take the time to go through it
> and it will usually pinpoint the problem area(s) -
> http://winhlp.com/wxnet.htm
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User


Thanks for reply.

Firewall? Both machines haveWinXP with SP2 one machine (old Dell) has Norton
Anti-Virus 2003 and new one came with Trend Micro PC-cillin.

Do not really understand this firewall if any as I have not to my knowledge
setup one.

I do get the popup about "apparently you have no permission, etc..
drybones


 
Reply With Quote
 
Malke
Guest
Posts: n/a

 
      05-03-2006, 02:16 PM
drybones wrote:

> Thanks for reply.
>
> Firewall? Both machines haveWinXP with SP2 one machine (old Dell) has
> Norton Anti-Virus 2003 and new one came with Trend Micro PC-cillin.
>
> Do not really understand this firewall if any as I have not to my
> knowledge setup one.
>
> I do get the popup about "apparently you have no permission, etc..
> drybones


OK, I'm betting you do have two firewalls running on the new machine or
you don't have the PC-cillin configured correctly. As I said in the
previous post, when you apply Service Pack 2 you get the Windows
Firewall which is automatically enabled. While your older Norton 2003*
doesn't have a firewall component, PC-cillin may. You will need to open
up PC-cillin and look at all its features and possibly read its Help
File. If it has something like "Personal Firewall" or "Internet Worm
Protection" then it has a firewall. If that firewall is on (and I'm
sure it would be automatically enabled when the program was installed)
and the Windows Firewall is on, file-sharing can be blocked.

Also, if PC-cillin has a firewall component and you ran the Network
Setup Wizard, as I said in my previously post the Wizard will enable
the Windows Firewall and you will have two firewalls running.

Additionally, even if PC-cillin is smart and turned off the Windows
Firewall (which newer versions of Norton and McAfee do), file-sharing
may not be enabled in PC-cillin. You're just going to have to look.

If you can't figure it out, have a professional come on-site and fix
things for you. There is no shame in doing this; I don't hesitate to
call a plumber when the sink leaks.

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
Malke
Guest
Posts: n/a

 
      05-03-2006, 06:14 PM
Malke wrote:

> OK, I'm betting you do have two firewalls running on the new machine
> or you don't have the PC-cillin configured correctly. As I said in the
> previous post, when you apply Service Pack 2 you get the Windows
> Firewall which is automatically enabled. While your older Norton 2003*
> doesn't have a firewall component, PC-cillin may. You will need to
> Malke


Sorry for the double post, but I see that I put an asterisk next to
"Norton 2003*" and then never put in the footnote. I wanted to remind
you that you shouldn't just renew NAV 2003 when your subscription
expires. That program is obsolete now and you should replace it with a
current version antivirus. I personally don't recommend Norton or
McAfee products, but naturally the choice is yours. I've heard good
things about Kaspersky and NOD32. I use F-Prot on my Windows machines.

Whatever you choose, uninstall NAV 2003 first.

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
drybones
Guest
Posts: n/a

 
      05-04-2006, 09:39 AM
<sigh> once again. The 77 year old brain cells are lost. Will have to have a
professional come on-site and fixthings for me. That is if I can find onewho
does not require a large invenstment.
drybones


"Malke" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Malke wrote:
>
>> OK, I'm betting you do have two firewalls running on the new machine
>> or you don't have the PC-cillin configured correctly. As I said in the
>> previous post, when you apply Service Pack 2 you get the Windows
>> Firewall which is automatically enabled. While your older Norton 2003*
>> doesn't have a firewall component, PC-cillin may. You will need to
>> Malke

>
> Sorry for the double post, but I see that I put an asterisk next to
> "Norton 2003*" and then never put in the footnote. I wanted to remind
> you that you shouldn't just renew NAV 2003 when your subscription
> expires. That program is obsolete now and you should replace it with a
> current version antivirus. I personally don't recommend Norton or
> McAfee products, but naturally the choice is yours. I've heard good
> things about Kaspersky and NOD32. I use F-Prot on my Windows machines.
>
> Whatever you choose, uninstall NAV 2003 first.
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User



 
Reply With Quote
 
Malke
Guest
Posts: n/a

 
      05-04-2006, 11:29 AM
drybones wrote:

> <sigh> once again. The 77 year old brain cells are lost. Will have to
> have a professional come on-site and fixthings for me. That is if I
> can find onewho does not require a large invenstment.


That's probably the best solution. I don't think it has anything to do
with your age. :-) We all have our areas of expertise. As I often say
to people, I don't hesitate to call a plumber when the sink is leaking.
I don't know where you live, but a simple on-site network setup here
(Fresno, California, USA) would cost $60-120USD.

Malke
--
Elephant Boy Computers
www.elephantboycomputers.com
"Don't Panic!"
MS-MVP Windows - Shell/User
 
Reply With Quote
 
Mike
Guest
Posts: n/a

 
      05-05-2006, 01:45 PM


"drybones" wrote:

> Wireless systerm setup between two Dell computers via a Linksys wireless
> router.
> I can see files in old Dell but can not access them.
> I did setup file and printer sharing.
> Now what?
>
> Thanks for reading and hopefully replying,
> drybones
>
>
>


(if you havn't got it to work yet)
there is a freeware program from globesoft called easy2share, perhaps that
one could help you. www.globesoft.com
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
So frustrating .. <sigh> T i m Broadband 4 07-13-2005 05:46 AM
*sigh* FAQ coming :) Richard Sobey Broadband 22 01-20-2005 12:11 PM
File Sharing Intermittent but Pings fine and iTunes Sharing works Chris Clark Wireless Networks 1 12-05-2004 12:07 PM
vserver.vxd file for print & file sharing Doug Windows Networking 1 05-01-2004 11:33 PM
mn700...{sigh} Rob Broadband Hardware 19 02-13-2004 01:31 AM



1 2 3 4 5 6 7 8 9 10 11