Depends on what stumped means?
1) You may not have the module for the wifi chipset.
This can be identified by doing dmesg and finding out if your
Wifi Chipset got recongnized correctly.
2) You may not have profiles set up properly.
In this case you will need to go into
/etc/sysconfig/networking/profiles/ and set it up correctly.
I know that is vague I think that will let you narrow down your
problem. Good Luck!

S
On Mon, 27 Mar 2006,
(E-Mail Removed) wrote:
> Hi folks.
>
> I'm relatively new to Linux and want to do the switch over from the
> coporate OS. I recently purchased a Compaq Presario V2575 laptop that
> has a 54g 802.11b/g wireless card, and did a Workstation install of
> Fedora Core 4.
>
> I was able to get almost everything working on the system right off
> the
> initial install, but I'm stumped on how to get the wireless working.
> Obviously this is really inhibiting my switchover.
>
> Might anyone have any tips or a walk-through handy that would help me
> out in enabling this card on my computer?
>
> Thanks in advance,
>
> ryth
>
>
--
cheers
Somu
************************************************** ***********************
"I've never understood how God could expect his creatures
to pick the one true religion by faith - it strikes me as a
sloppy way to run a universe."
Robert A. Heinlein
STRANGER IN A STRANGE LAND
************************************************** ***********************