Networking Forums

Networking Forums > Computer Networking > Windows Networking > Exchange and ports on a LINKSYS BEFW11S4 ROUTER

Reply
Thread Tools Display Modes

Exchange and ports on a LINKSYS BEFW11S4 ROUTER

 
 
Mr.IT
Guest
Posts: n/a

 
      09-25-2005, 09:13 AM
I used to be able to send and receive emails through my exchange server...
but recently I accidently changed a setting and had to wipe all the port
settings with the hard wipe i had to do...

Here are the ports i have setup

http://homepage.ntlworld.com/s.mount/portforward.bmp
and
http://homepage.ntlworld.com/s.mount/upnpforward.bmp

(Please have a look at them)

Please tell me what is wrong. I grabbed these off a website and still i get
the message that says -

**********************************************
Your message did not reach some or all of the intended recipients.

Subject: test
Sent: 25/09/2005 10:11

The following recipient(s) could not be reached:

(E-Mail Removed) on 25/09/2005 10:11
The destination server for this recipient could not be found in Domain
Name Service (DNS). Please verify the email address and retry. If that fails,
contact your administrator.
<MY SERVER #5.4.0>

************************************************** ********

SOME details removed for privacy.

Cheers!

MR. IT



 
Reply With Quote
 
 
 
 
Frank
Guest
Posts: n/a

 
      09-25-2005, 01:08 PM
Check your DNS config...

-Frank

"Mr.IT" <(E-Mail Removed)> wrote in message
news:A1481E7E-6BC4-4368-9B3B-(E-Mail Removed)...
>I used to be able to send and receive emails through my exchange server...
> but recently I accidently changed a setting and had to wipe all the port
> settings with the hard wipe i had to do...
>
> Here are the ports i have setup
>
> http://homepage.ntlworld.com/s.mount/portforward.bmp
> and
> http://homepage.ntlworld.com/s.mount/upnpforward.bmp
>
> (Please have a look at them)
>
> Please tell me what is wrong. I grabbed these off a website and still i
> get
> the message that says -
>
> **********************************************
> Your message did not reach some or all of the intended recipients.
>
> Subject: test
> Sent: 25/09/2005 10:11
>
> The following recipient(s) could not be reached:
>
> (E-Mail Removed) on 25/09/2005 10:11
> The destination server for this recipient could not be found in Domain
> Name Service (DNS). Please verify the email address and retry. If that
> fails,
> contact your administrator.
> <MY SERVER #5.4.0>
>
> ************************************************** ********
>
> SOME details removed for privacy.
>
> Cheers!
>
> MR. IT
>
>
>



 
Reply With Quote
 
Mr.IT
Guest
Posts: n/a

 
      09-26-2005, 06:31 PM
Hello, cheers for the info... but how? is it through the TCP/IP Config on the
NIC?

Stephen

"Frank" wrote:

> Check your DNS config...
>
> -Frank
>
> "Mr.IT" <(E-Mail Removed)> wrote in message
> news:A1481E7E-6BC4-4368-9B3B-(E-Mail Removed)...
> >I used to be able to send and receive emails through my exchange server...
> > but recently I accidently changed a setting and had to wipe all the port
> > settings with the hard wipe i had to do...
> >
> > Here are the ports i have setup
> >
> > http://homepage.ntlworld.com/s.mount/portforward.bmp
> > and
> > http://homepage.ntlworld.com/s.mount/upnpforward.bmp
> >
> > (Please have a look at them)
> >
> > Please tell me what is wrong. I grabbed these off a website and still i
> > get
> > the message that says -
> >
> > **********************************************
> > Your message did not reach some or all of the intended recipients.
> >
> > Subject: test
> > Sent: 25/09/2005 10:11
> >
> > The following recipient(s) could not be reached:
> >
> > (E-Mail Removed) on 25/09/2005 10:11
> > The destination server for this recipient could not be found in Domain
> > Name Service (DNS). Please verify the email address and retry. If that
> > fails,
> > contact your administrator.
> > <MY SERVER #5.4.0>
> >
> > ************************************************** ********
> >
> > SOME details removed for privacy.
> >
> > Cheers!
> >
> > MR. IT
> >
> >
> >

>
>
>

 
Reply With Quote
 
Ian
Guest
Posts: n/a

 
      09-26-2005, 07:36 PM
Mr.IT wrote:
> Hello, cheers for the info... but how? is it through the TCP/IP Config on the
> NIC?
>
> Stephen
>
> "Frank" wrote:
>
>
>>Check your DNS config...
>>
>>-Frank
>>
>>"Mr.IT" <(E-Mail Removed)> wrote in message
>>news:A1481E7E-6BC4-4368-9B3B-(E-Mail Removed)...
>>
>>>I used to be able to send and receive emails through my exchange server...
>>>but recently I accidently changed a setting and had to wipe all the port
>>>settings with the hard wipe i had to do...
>>>
>>>Here are the ports i have setup
>>>
>>>http://homepage.ntlworld.com/s.mount/portforward.bmp
>>>and
>>>http://homepage.ntlworld.com/s.mount/upnpforward.bmp
>>>
>>>(Please have a look at them)
>>>
>>>Please tell me what is wrong. I grabbed these off a website and still i
>>>get
>>>the message that says -
>>>
>>>********************************************* *
>>>Your message did not reach some or all of the intended recipients.
>>>
>>>Subject: test
>>>Sent: 25/09/2005 10:11
>>>
>>>The following recipient(s) could not be reached:
>>>
>>> (E-Mail Removed) on 25/09/2005 10:11
>>> The destination server for this recipient could not be found in Domain
>>>Name Service (DNS). Please verify the email address and retry. If that
>>>fails,
>>>contact your administrator.
>>> <MY SERVER #5.4.0>
>>>
>>>*********************************************** ***********
>>>
>>>SOME details removed for privacy.
>>>
>>>Cheers!
>>>
>>>MR. IT
>>>
>>>
>>>

>>
>>
>>

What is the DNS setting on the NIC of your Exchange server
Ian
 
Reply With Quote
 
Mr.IT
Guest
Posts: n/a

 
      09-27-2005, 06:53 AM
it is the DNS servers of my ISP i think--- 194.168.4.100 and 194.168.8.100

Is that correct?

Mr. IT

"Ian" wrote:

> Mr.IT wrote:
> > Hello, cheers for the info... but how? is it through the TCP/IP Config on the
> > NIC?
> >
> > Stephen
> >
> > "Frank" wrote:
> >
> >
> >>Check your DNS config...
> >>
> >>-Frank
> >>
> >>"Mr.IT" <(E-Mail Removed)> wrote in message
> >>news:A1481E7E-6BC4-4368-9B3B-(E-Mail Removed)...
> >>
> >>>I used to be able to send and receive emails through my exchange server...
> >>>but recently I accidently changed a setting and had to wipe all the port
> >>>settings with the hard wipe i had to do...
> >>>
> >>>Here are the ports i have setup
> >>>
> >>>http://homepage.ntlworld.com/s.mount/portforward.bmp
> >>>and
> >>>http://homepage.ntlworld.com/s.mount/upnpforward.bmp
> >>>
> >>>(Please have a look at them)
> >>>
> >>>Please tell me what is wrong. I grabbed these off a website and still i
> >>>get
> >>>the message that says -
> >>>
> >>>********************************************* *
> >>>Your message did not reach some or all of the intended recipients.
> >>>
> >>>Subject: test
> >>>Sent: 25/09/2005 10:11
> >>>
> >>>The following recipient(s) could not be reached:
> >>>
> >>> (E-Mail Removed) on 25/09/2005 10:11
> >>> The destination server for this recipient could not be found in Domain
> >>>Name Service (DNS). Please verify the email address and retry. If that
> >>>fails,
> >>>contact your administrator.
> >>> <MY SERVER #5.4.0>
> >>>
> >>>*********************************************** ***********
> >>>
> >>>SOME details removed for privacy.
> >>>
> >>>Cheers!
> >>>
> >>>MR. IT
> >>>
> >>>
> >>>
> >>
> >>
> >>

> What is the DNS setting on the NIC of your Exchange server
> Ian
>

 
Reply With Quote
 
Ian
Guest
Posts: n/a

 
      09-27-2005, 09:13 AM
Mr.IT wrote:
> it is the DNS servers of my ISP i think--- 194.168.4.100 and 194.168.8.100
>
> Is that correct?
>
> Mr. IT
>
> "Ian" wrote:
>
>
>>Mr.IT wrote:
>>
>>>Hello, cheers for the info... but how? is it through the TCP/IP Config on the
>>>NIC?
>>>
>>>Stephen
>>>
>>>"Frank" wrote:
>>>
>>>
>>>
>>>>Check your DNS config...
>>>>
>>>>-Frank
>>>>
>>>>"Mr.IT" <(E-Mail Removed)> wrote in message
>>>>news:A1481E7E-6BC4-4368-9B3B-(E-Mail Removed)...
>>>>
>>>>
>>>>>I used to be able to send and receive emails through my exchange server...
>>>>>but recently I accidently changed a setting and had to wipe all the port
>>>>>settings with the hard wipe i had to do...
>>>>>
>>>>>Here are the ports i have setup
>>>>>
>>>>>http://homepage.ntlworld.com/s.mount/portforward.bmp
>>>>>and
>>>>>http://homepage.ntlworld.com/s.mount/upnpforward.bmp
>>>>>
>>>>>(Please have a look at them)
>>>>>
>>>>>Please tell me what is wrong. I grabbed these off a website and still i
>>>>>get
>>>>>the message that says -
>>>>>
>>>>>********************************************* *
>>>>>Your message did not reach some or all of the intended recipients.
>>>>>
>>>>>Subject: test
>>>>>Sent: 25/09/2005 10:11
>>>>>
>>>>>The following recipient(s) could not be reached:
>>>>>
>>>>>(E-Mail Removed) on 25/09/2005 10:11
>>>>>The destination server for this recipient could not be found in Domain
>>>>>Name Service (DNS). Please verify the email address and retry. If that
>>>>>fails,
>>>>>contact your administrator.
>>>>><MY SERVER #5.4.0>
>>>>>
>>>>>********************************************* *************
>>>>>
>>>>>SOME details removed for privacy.
>>>>>
>>>>>Cheers!
>>>>>
>>>>>MR. IT
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>

>>What is the DNS setting on the NIC of your Exchange server
>>Ian
>>

Are you using exchange server for your email (are you using a mapi
client) or do you just want to relay messages out via SMTP Server?

If you are using Outlook and exchange - have you ran through the
Internet Mail wizard in exchange to tell the server that you wan't it to
send email to the internet?

If you just want to relay through the Virtual SMTP Server - have you
added the IP address of the client to be Allowed to Relay?

Ian
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
linksys wireless router BEFW11s4 v3 Zorluhan Zorlu Wireless Internet 1 09-05-2007 05:20 PM
Linksys BEFW11S4 router repair eljainc@sbcglobal.net Wireless Internet 6 06-13-2006 11:14 AM
LinkSys BEFW11S4 Router Stan Ferguson-Smith Home Networking 1 03-15-2005 08:02 AM
Linksys BEFW11S4 wireless router and MN-730 simplegn Broadband Hardware 5 07-09-2004 03:39 AM
Linksys router(BEFW11S4) and MS PCI card (MN-730) HElp! pnpbios Broadband Hardware 7 04-13-2004 03:44 PM



1 2 3 4 5 6 7 8 9 10 11