Is it possible to do ethernet bridging reliably over bonded interfaces?
I'm seeing 50% packet loss when I try it, even with stp enabled.
Actually, I'm trying to do ethernet bridging of vlans over bonded
interfaces, just to make life complicated, but it all works fine as long
as I pull out one of the cables on each bonded interface. So I don't
think the fact that I'm using vlan interfaces to create the bridge is
the source of the problem.
This is on 2.6.8, using the standard bridging utilities and
active-backup mode on the bonded interfaces.
--
Bruce
Nostalgia isn't what it used to be.
|
Similar Threads
Linear Mode
