Ether net card problems

hi all

This is my first posting to this group.Hope u guys will help.
Well i have two PC1 and PC2
CONFIGURATION

PC1 : Fairly New
P4(1.7 GHz)+128 RAM+WINXP+40GB HDD

PC2: Quite Old
p2(825 MHz)+128RAM + WINXP + 40GB HDD

NIC=Network Interface Card or ethernet card

Now when my pc1 is on and i remove or add NIC then it does not hang
(while the pc is on)but in pc2 it jus hangs when i try to remove or add
a NIC why that so .ALSO i have two nics one is working and another is
damaged but in PC-1 when i boot with the damaged one attached it does
not have a problem booting up but in pc2 whe

Asked and answered elsewhere.

--
Richard G. Harper [MVP Shell/User] (E-Mail Removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* My website, such as it is ... http://rgharper.mvps.org/
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"Arpit" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> hi all
>
> This is my first posting to this group.Hope u guys will help.
> Well i have two PC1 and PC2
> CONFIGURATION
>
> PC1 : Fairly New
> P4(1.7 GHz)+128 RAM+WINXP+40GB HDD
>
> PC2: Quite Old
> p2(825 MHz)+128RAM + WINXP + 40GB HDD
>
> NIC=Network Interface Card or ethernet card
>
> Now when my pc1 is on and i remove or add NIC then it does not hang
> (while the pc is on)but in pc2 it jus hangs when i try to remove or add
> a NIC why that so .ALSO i have two nics one is working and another is
> damaged but in PC-1 when i boot with the damaged one attached it does
> not have a problem booting up but in pc2 whe
>