Error 5719 - Span Tree

Hi Folks,

i have a Dell PowerEDGE Server 2850 with Intel Server Adapter 1000MT.
when the server start he stop the network port and start it again, on the
switch side when the NETLOGON service start you able to see that the port in
in learning status, (Spantree) cause this behavior.

i found an article that able to add a timeout to the netlogon service but
it's look like that the parameter doesn't take affect in win2k3 sp1, the
option is:
"Expected dial-up delay on logon"
by article
http://technet2.microsoft.com/Window....mspx?mfr=true

the only way i able to solve the problem is by enabling Fast-Start on the
Server port in the switch.
Need help A.S.A.P.


--
---------------------------------------
במידה ועזרתי לחץ/י "כן" בשורה בצבע תכלת בתחתית המסך.
---------------------------------------

Cheers,
Niv Raz

try to disable the BMC controller and check if something will change.

--
Regards,
Andrei Ungureanu
www.eventid.net
Test our new EventReader!
http://www.altairtech.ca/eventreader...lt2.asp?ref=au

"Niv Raz" <(E-Mail Removed)> wrote in message
news:FE0F2E7E-3121-45E0-9979-(E-Mail Removed)...
> Hi Folks,
>
> i have a Dell PowerEDGE Server 2850 with Intel Server Adapter 1000MT.
> when the server start he stop the network port and start it again, on the
> switch side when the NETLOGON service start you able to see that the port
> in
> in learning status, (Spantree) cause this behavior.
>
> i found an article that able to add a timeout to the netlogon service but
> it's look like that the parameter doesn't take affect in win2k3 sp1, the
> option is:
> "Expected dial-up delay on logon"
> by article:
> http://technet2.microsoft.com/Window....mspx?mfr=true
>
> the only way i able to solve the problem is by enabling Fast-Start on the
> Server port in the switch.
> Need help A.S.A.P.
>
>
> --
> ---------------------------------------
> ????? ?????? ???/? "??" ????? ???? ???? ?????? ????.
> ---------------------------------------
>
> Cheers,
> Niv Raz

Hi,

i don't know! what is it the BMC? i have and Instal Server Adapter 1000Mt.


"Andrei Ungureanu" <contact me via www.itboard.ro> wrote in message
news:(E-Mail Removed)...
> try to disable the BMC controller and check if something will change.
>
> --
> Regards,
> Andrei Ungureanu
> www.eventid.net
> Test our new EventReader!
> http://www.altairtech.ca/eventreader...lt2.asp?ref=au
>
> "Niv Raz" <(E-Mail Removed)> wrote in message
> news:FE0F2E7E-3121-45E0-9979-(E-Mail Removed)...
>> Hi Folks,
>>
>> i have a Dell PowerEDGE Server 2850 with Intel Server Adapter 1000MT.
>> when the server start he stop the network port and start it again, on the
>> switch side when the NETLOGON service start you able to see that the port
>> in
>> in learning status, (Spantree) cause this behavior.
>>
>> i found an article that able to add a timeout to the netlogon service but
>> it's look like that the parameter doesn't take affect in win2k3 sp1, the
>> option is:
>> "Expected dial-up delay on logon"
>> by article:
>> http://technet2.microsoft.com/Window....mspx?mfr=true
>>
>> the only way i able to solve the problem is by enabling Fast-Start on the
>> Server port in the switch.
>> Need help A.S.A.P.
>>
>>
>> --
>> ---------------------------------------
>> ????? ?????? ???/? "??" ????? ???? ???? ?????? ????.
>> ---------------------------------------
>>
>> Cheers,
>> Niv Raz
>
>

BMC=baseboard management controller. Check the server BIOS.

--
Regards,
Andrei Ungureanu
www.eventid.net
Test our new EventReader!
http://www.altairtech.ca/eventreader...lt2.asp?ref=au

"Niv Raz" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi,
>
> i don't know! what is it the BMC? i have and Instal Server Adapter 1000Mt.
>
>
> "Andrei Ungureanu" <contact me via www.itboard.ro> wrote in message
> news:(E-Mail Removed)...
>> try to disable the BMC controller and check if something will change.
>>
>> --
>> Regards,
>> Andrei Ungureanu
>> www.eventid.net
>> Test our new EventReader!
>> http://www.altairtech.ca/eventreader...lt2.asp?ref=au
>>
>> "Niv Raz" <(E-Mail Removed)> wrote in message
>> news:FE0F2E7E-3121-45E0-9979-(E-Mail Removed)...
>>> Hi Folks,
>>>
>>> i have a Dell PowerEDGE Server 2850 with Intel Server Adapter 1000MT.
>>> when the server start he stop the network port and start it again, on
>>> the
>>> switch side when the NETLOGON service start you able to see that the
>>> port in
>>> in learning status, (Spantree) cause this behavior.
>>>
>>> i found an article that able to add a timeout to the netlogon service
>>> but
>>> it's look like that the parameter doesn't take affect in win2k3 sp1, the
>>> option is:
>>> "Expected dial-up delay on logon"
>>> by article:
>>> http://technet2.microsoft.com/Window....mspx?mfr=true
>>>
>>> the only way i able to solve the problem is by enabling Fast-Start on
>>> the
>>> Server port in the switch.
>>> Need help A.S.A.P.
>>>
>>>
>>> --
>>> ---------------------------------------
>>> ????? ?????? ???/? "??" ????? ???? ???? ?????? ????.
>>> ---------------------------------------
>>>
>>> Cheers,
>>> Niv Raz
>>
>>
>
>

Hello
look http://support.microsoft.com/?kbid=905700

"Andrei Ungureanu" wrote:

> try to disable the BMC controller and check if something will change.
>
> --
> Regards,
> Andrei Ungureanu
> www.eventid.net
> Test our new EventReader!
> http://www.altairtech.ca/eventreader...lt2.asp?ref=au
>
> "Niv Raz" <(E-Mail Removed)> wrote in message
> news:FE0F2E7E-3121-45E0-9979-(E-Mail Removed)...
> > Hi Folks,
> >
> > i have a Dell PowerEDGE Server 2850 with Intel Server Adapter 1000MT.
> > when the server start he stop the network port and start it again, on the
> > switch side when the NETLOGON service start you able to see that the port
> > in
> > in learning status, (Spantree) cause this behavior.
> >
> > i found an article that able to add a timeout to the netlogon service but
> > it's look like that the parameter doesn't take affect in win2k3 sp1, the
> > option is:
> > "Expected dial-up delay on logon"
> > by article:
> > http://technet2.microsoft.com/Window....mspx?mfr=true
> >
> > the only way i able to solve the problem is by enabling Fast-Start on the
> > Server port in the switch.
> > Need help A.S.A.P.
> >
> >
> > --
> > ---------------------------------------
> > ????? ?????? ???/? "??" ????? ???? ???? ?????? ????.
> > ---------------------------------------
> >
> > Cheers,
> > Niv Raz
>
>
>