Networking Forums

Networking Forums > Wireless Networking > Wireless Internet > EPIA mini-ITX PCMICA IRQ problem?

Reply
Thread Tools Display Modes

EPIA mini-ITX PCMICA IRQ problem?

 
 
Freddan
Guest
Posts: n/a

 
      02-04-2004, 11:35 AM
Hi,

I have problem with a configuration on a PC, it's a wyse winterm 3455XL.
The poroblem is that my network card dosen't work, it will not start (code
10).

I'm running windows (have tried 98, 2k and XP) with same error.

The moderboard is a Via EPIA mini-ITX card.
The bridge is a ELAN PSeries PC-Card: Twin Rear Slot Universal PCI to PCMCIA
Adapter: P222.
The network card is a PCMICA Proxim rangeLan2 7400 PC-card.

Does it exist any drivers or documentation how to configure and get this
hardware
to run? Some bios settings that solve the problem?

Thanks in advance.

Greetings Fredrik.


 
Reply With Quote
 
 
 
 
JT
Guest
Posts: n/a

 
      02-05-2004, 02:52 AM
On Wed, 04 Feb 2004 12:35:47 GMT, "Freddan"
<(E-Mail Removed)> wrote:

>Hi,
>
>I have problem with a configuration on a PC, it's a wyse winterm 3455XL.
>The poroblem is that my network card dosen't work, it will not start (code
>10).
>
>I'm running windows (have tried 98, 2k and XP) with same error.
>
>The moderboard is a Via EPIA mini-ITX card.
>The bridge is a ELAN PSeries PC-Card: Twin Rear Slot Universal PCI to PCMCIA
>Adapter: P222.
>The network card is a PCMICA Proxim rangeLan2 7400 PC-card.
>
>Does it exist any drivers or documentation how to configure and get this
>hardware
>to run? Some bios settings that solve the problem?
>
>Thanks in advance.
>
>Greetings Fredrik.
>

Did you install drivers for the Elan P222 and the Proxim card? Do both of
them show up in device manager? There are drivers for both on the web.

JT
 
Reply With Quote
 
Freddan
Guest
Posts: n/a

 
      02-05-2004, 09:20 AM
Yes, drivers are installed for both.

P222 shows ok in the device manager, other card work with this adapter (3Com
etherlink III).
Proxim card show NOT ok in the device manager (code 10).

When changing some settings in the bios, disable som irq:s
and so, the plug n play detect the card as a MTD-0002.
Read about this in some postings but it was related to another
system configuration.
If I force driver update to proxim 7400 driver then the code 10 problem.

Thanks.

&Freddan


> Did you install drivers for the Elan P222 and the Proxim card? Do both of
> them show up in device manager? There are drivers for both on the web.



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
12 dbi mini antenna seaweedsteve Wireless Internet 0 10-05-2006 05:56 PM
Supply Mini-Com Coupler Modules ,Mini-com Coupler Modules,Panduit Mini-com Coupler Module,Panduit Minicom Modules,Panduit Mini-Com Module,Panduit Mini-com Fiber Optic Adapter Modules samul888@vip.163.com Broadband 0 04-23-2006 01:48 PM
Problem installing mini-PCI adapter under W98SE Edward S. Baiz Jr. Windows Networking 0 11-06-2004 12:12 PM
Linux Fedora Core2 and VIA EPIA CL10000 network problem Jarek Mekarski Linux Networking 1 09-29-2004 01:28 PM
mini-USB Usenet@nerogoth.net Wireless Internet 0 06-14-2004 03:23 PM



1 2 3 4 5 6 7 8 9 10 11