EOC-3220+ routing problem

Engenius support hasn't been able to resolve this issue. Anyone in this
forum have an idea:
We have 2 EOC-3220+ units whose sole purpose in life is to extend or
bridge the network between 2 locations 1/4 mile apart. We upgraded
both
to firmware version v1.41.05

Since the upgrade, Internet works better, however we cannot access
services between locations. Interestingly, we can ping between
locations
without failure.

Location CR provides Internet access for HG, and has web, mail & SMB
services used by HG.

Other items of interest:
We can administer both EOC units from site CR, Site HG can administer
its EOC unit, it can ping CR's EOC unit, but cannot administer it.

Configuration details:
CR EOC:
Access Point Status
System
Uptime 0day:18h:10m:43s
Firmware Version v1.41.05
Wireless Configuration
Mode AP+WDS
Band 2.4 GHz (G)
SSID 347cr
Channel Number 1
Encryption WPA2(AP), Disabled(WDS)
BSSID 00:02:6f:44:7e:74
Associated Clients 1
TCP/IP Configuration
Attain IP Protocol Fixed IP
IP Address 192.168.35.7
Subnet Mask 255.255.255.0
Default Gateway 192.168.35.1
DHCP Server
MAC Address 00:02:6f:44:7e:74

HG EOC:
Client Bridge Status
System
Uptime 0day:15h:47m:58s
Firmware Version v1.41.05
Wireless Configuration
Mode Infrastructure Client Bridge
Band 2.4 GHz (G)
SSID 347cr
Channel Number 1
Encryption WPA2
BSSID 00:02:6f:44:7e:74
State Connected
Signal Strength -77.40
Noise Level -93.50
TCP/IP Configuration
Attain IP Protocol Fixed IP
IP Address 192.168.35.6
Subnet Mask 255.255.255.0
Default Gateway 192.168.35.1
DHCP Server
MAC Address 00:02:6f:44:7e:75

Please advise best way to get this working.


------------------------------------------------------------------------
View this thread: http://www.wirelessforums.org/showthread.php?t=31559
http://www.wirelessforums.org