dual nics satellite ISC add 700 wireless router

I have browsed thru several newsgroup pages, but can you
hook the MN-700 as a hub (switch) that will still allow
the dual NIC's to allow internet connection sharing.

Basically, I am using 192.168.0.1 as the gateway, and I
can type in the DNS if necessary. But this router is not
allowing my to use 192.168.0.1 as the gateway. Tried
Static and input all settings, and Tried dyanmic w/ DNS
input.

BTW: With a direcway 4000 dual modem, you have to give
on computer access to highspeed internet and the ICS is
done thru the second NIC. So How do I hook the wireless
router to this network?

Thanks in advance...

Yes.

The MS routers are configured to use 192.168.2.x subnet
by default. You can change this on the LAN screen of the
router. Also disable DHCP and probably the firewall on
the router.

>-----Original Message-----
>I have browsed thru several newsgroup pages, but can you
>hook the MN-700 as a hub (switch) that will still allow
>the dual NIC's to allow internet connection sharing.
>
>Basically, I am using 192.168.0.1 as the gateway, and I
>can type in the DNS if necessary. But this router is
not
>allowing my to use 192.168.0.1 as the gateway. Tried
>Static and input all settings, and Tried dyanmic w/ DNS
>input.
>
>BTW: With a direcway 4000 dual modem, you have to give
>on computer access to highspeed internet and the ICS is
>done thru the second NIC. So How do I hook the wireless
>router to this network?
>
>Thanks in advance...
>.
>